Network - Philips BDL4988XL User Manual

BDL4988XL
Example: 5 x 5 screen matrix (25 displays)
H monitors = 5 displays
V monitors = 5 displays
H monitors
1 2
6 7
11 12 13
16 17 18
21 22 23
Frame comp.
Choose to turn the frame compensation function on or off. If selected
{On}, the display will adjust the image to compensate for the width of
the display bezels in order to accurately display the image.
{On}
{Off}
Switch on delay
Adjust the power-on delaying time (in seconds) allows a sequential
powering-on for each display by their ID number when multiple displays
are connected.
Auto ID
The setup function enables setting up {Monitor ID} of connected
machine according to {H monitors} settings.
Example: H monitors sets as 4
3 4 5
8 9 10
14 15
19 20
24 25
1
5
Position
9
13
Note: To use this function, serial connect all machines with RS-232 cable
and set their Network control port to RS-232 too.
Note: To use this function for DP 1.2 connectivity, the maximum
resolution only support to 1920x1080/60Hz @ 4sets. For 4Kx2K/30Hz
resolution only support to 2 sets connectivity.

5.1.4. Network

Picture
Sound
Tiling
Network
General settings
Network settings
• {Network configuration}: Choose how this display should assign
addresses to the network resources.
The user can choose {DHCP & Auto IP} (suggested) or {Static IP}.
• {Network type}: Choose Wired (default) to set the network type.
Digital Media Renderer - DMR
Receive multimedia files from the connected device by your network.
Network name
In the multiple-display connection, you can rename each display for easy
identification.
Use the on-screen keyboard or the remote control keypad to enter the
name.
Clear Internet memory
Clear all the cookies, bookmarks, history list and text used for auto fill.
24
2 3
6 7
10 11
14 15
Network settings
Digital Media Rendere...
Network name
Clear Internet memory
4
8
12
16