Contents Home Cinema 660/760HD/1060 User's Guide.................... 9 Introduction to Your Projector ......................... 10 Projector Features..........................10 Product Box Contents........................11 Additional Components ........................ 12 Additional Projector Software and Manuals ................... 13 Optional Equipment and Replacement Parts................. 14 Warranty and Registration Information ..................15 Notations Used in the Documentation ....................
Page 4
Connecting to a Component Video Source ................40 Connecting to a Composite Video Source ................41 Connecting to a Video Source for Sound .................. 42 Connecting to External USB Devices .................... 43 USB Device Projection......................44 Connecting a USB Device or Camera to the Projector.............. 44 Selecting the Connected USB Source ..................
Page 5
Correcting Image Shape with Quick Corner .................. 78 Resizing the Image with the Zoom Ring ..................... 80 Focusing the Image Using the Focus Ring..................80 Remote Control Operation ......................... 81 Using the Remote Control as a Wireless Mouse ................82 Using the Remote Control as a Pointer..................
Page 6
Locking the Projector's Buttons ....................108 Unlocking the Projector's Buttons ................... 109 Installing a Security Cable ......................109 Projector Identification System for Multiple Projector Control............110 Setting the Projector ID........................ 110 Setting the Remote Control ID..................... 111 Matching Multiple-Projector Display Quality ................112 Projecting Two Images Simultaneously....................
Page 7
Resetting the Lamp Timer....................... 156 Replacing the Remote Control Batteries ..................157 Transporting the Projector........................ 159 Solving Problems ............................ 160 Projection Problem Tips ........................160 Projector Light Status ........................161 Using the Projector Help Displays ....................164 Solving Image or Sound Problems ....................165 Solutions When No Image Appears.....................
Page 8
Projector Dimension Specifications....................183 Projector Electrical Specifications ....................183 Projector Environmental Specifications.................... 184 Projector Safety and Approvals Specifications................. 185 Supported Video Display Formats....................185 USB Display System Requirements ....................189 Notices ..............................191 Recycling............................191 Important Safety Information ......................191 Important Safety Instructions......................
Your projector includes these special features: Bright, high-resolution projection system • Home Cinema 660/760HD: Up to 3300 lumens of color brightness (color light output) and 3300 lumens of white brightness (white light output) • Home Cinema 1060: Up to 3100 lumens of color brightness (color light output) and 3100 lumens of...
• Automatic vertical keystone correction and innovative horizontal keystone correction slider for flexible projector placement • Epson's Instant Off and Direct Power On features for quick setup and shut down • Built-in closed captioning decoder (composite NTSC input signal only) Note: The Home Cinema 1060 is shown in most illustrations in this manual, unless noted otherwise.
Make sure your projector boxes included all of these parts: Projector Remote control Remote control batteries (two AA alkaline) Power cord Projector documentation CD Parent topic: Projector Features Related concepts Projector Connections Additional Components Depending on how you plan to use the projector, you may need to obtain additional components. Note: To connect a Mac that does not include a compatible video output port, you need to obtain an adapter that allows you to connect to an input port on the projector.
Unless listed as available from Epson in this table, see your local computer or electronics dealer for purchase information. Signal or connection Additional component necessary type Composite video RCA-style video or A/V cable Component video D-sub, 15-pin, component-to-VGA video cable or adapter Available for purchase from Epson or an authorized Epson reseller.
Optional Equipment and Replacement Parts You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766) in the U.S. or 800-807-7766 in Canada. Or you can purchase online at epsonstore.com...
In addition, Epson offers free Extra Care Home Service. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States, Canada, or Puerto Rico. See the Extra Care Home Service brochure for details.
• If you still need help after checking this manual and any other sources listed here, you can use the Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help". Parent topic:...
Projector Parts - Front/Top Exhaust vent A/V Mute slide lever Foot release lever Lens cover Front adjustable foot Lens Remote control receiver Horizontal keystone slider Air filter/intake vent Air filter cover Kensington security lock slot Control panel Zoom ring (Home Cinema 760HD/1060)
Focus ring Lamp cover Parent topic: Projector Part Locations Projector Parts - Rear Home Cinema 660/760HD Home Cinema 1060 AC input Audio ports Video port Remote receiver...
Speaker HDMI port (Home Cinema 660/760HD); HDMI1 and HDMI2/MHL ports (Home Cinema 1060) Computer port USB-B port USB-A port Parent topic: Projector Part Locations Projector Parts - Base Ceiling mount holes (3) Security cable attachment point...
Rear feet Front adjustable foot Parent topic: Projector Part Locations Projector Parts - Control Panel Home Cinema 660...
Page 21
Home Cinema 760HD Home Cinema 1060 Source Search button (searches for connected video sources) Enter button (selects options)
Page 22
Vertical keystone adjustment buttons (displays the adjustment screen and adjusts screen shape) and arrow buttons Esc button (cancels/exits functions) Volume buttons (adjust speaker volume; Home Cinema 760HD/1060), horizontal keystone adjustment buttons, and arrow buttons Menu button (accesses projector menu system) Home button (displays Home screen) Power button Status lights...
Page 24
Computer button (cycles through connected computer sources) HDMI/Video button (cycles through connected HDMI/video sources) Numeric buttons (enter numbers) Auto button (automatically adjusts position, tracking, and sync settings when projecting from a computer using a VGA cable) Aspect button (selects the image aspect ratio) Num button (when held down, switches numeric buttons to number function) Menu button (accesses projector menu system) Arrow buttons (move through on-screen options and control wireless mouse functions)
Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Projector Connections Installing Batteries in the Remote Control Opening the Lens Cover Projector Placement You can place the projector on almost any flat surface to project an image. You can also install the projector in a ceiling mount if you want to use it in a fixed location.
Rear Ceiling Wherever you set up the projector, make sure to position it squarely in front of the center of the screen, not at an angle, if possible. If you project from the ceiling or from the rear, be sure to select the correct Projection option in the projector's menu system.
Page 29
(Caribbean). Projection distance Distance from the center of the lens to the base of the image Center of lens Home Cinema 660 4:3 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Offset from lens center (2)
Page 30
4:3 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 80 inches 93 to 126 inches –5.2 inches (–13 cm) (237 to 321 cm) 100 inches 117 to 158 inches –6.5 inches (–17 cm) (297 to 401 cm) 150 inches...
Home Cinema 1060 16:9 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 50 inches 44 to 54 inches –1.6 inch (–4 cm) (113 to 136 cm) 80 inches 71 to 86 inches –2.6 inches (–7 cm) (181 to 219 cm)
Note: A USB connection may cause a delay for content requiring high bandwidth, such as movies. An HDMI connection is recommended for projecting movies, video games, and other home entertainment content. 1. Turn on your computer. 2. Connect the cable to your projector's USB-B port. Home Cinema 660/760HD...
• Windows 10/Windows 8.x: Click EPSON_PJ_UD when it appears on the desktop, then select Run EMP_UDSE.EXE in the dialog box that appears to install the Epson USB Display software. • Windows 7/Windows Vista: Select Run EMP_UDSE.EXE in the dialog box that appears to install the Epson USB Display software.
3. Connect the other end to a Computer port on the projector. Home Cinema 660/760HD Home Cinema 1060 4. Tighten the screws on the VGA connector. Parent topic: Connecting to Computer Sources Related tasks Connecting to a Computer for Sound Connecting to a Computer for HDMI Video and Audio If your computer has an HDMI port, you can connect it to the projector using an optional HDMI cable.
Page 35
1. Connect the HDMI cable to your computer's HDMI output port. 2. Connect the other end to the projector's HDMI port. Home Cinema 660/760HD Home Cinema 1060 Note: The projector converts the digital audio signal sent from your computer into a mono analog signal for the internal speaker.
To do this, connect the projector to your computer using a USB cable, if it is not connected already. 1. Connect the USB cable to your projector's USB-B port. Home Cinema 660/760HD Home Cinema 1060 2. Connect the other end to any available USB port on your computer.
1. Connect the audio cable to your laptop's headphone or audio-out jack, or your desktop's speaker or audio-out port. 2. Connect the other end to the projector's Audio ports. Home Cinema 660/760HD Home Cinema 1060 Parent topic: Connecting to Computer Sources...
If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable. The HDMI connection provides the best image quality. 1. Connect the HDMI cable to your video source's HDMI output port. 2. Connect the other end to the projector's HDMI port. Home Cinema 660/760HD...
Home Cinema 1060 Note: The projector converts the digital audio signal sent from your video source into a mono analog signal for the internal speaker. Note: If you connected a game console, it may take a few seconds for your image to appear when you switch to the game console's input source.
1. Connect the component connectors to your video source's color-coded component video output ports, usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors to your component video cable. 2. Connect the VGA connector to the Computer port on the projector. Home Cinema 660/760HD...
Home Cinema 1060 3. Tighten the screws on the VGA connector. If your image colors appear incorrect, you may need to change the Input Signal setting in the projector's Signal menu. Parent topic: Connecting to Video Sources Related references Input Signal Settings - Signal Menu Related tasks Connecting to a Video Source for Sound Connecting to a Composite Video Source...
2. Connect the other end to the projector's Video port. Home Cinema 660/760HD Home Cinema 1060 Note: If you connected a game console, it may take a few seconds for your image to appear when you switch to the game console's input source. To reduce the potential lag in response time to game commands, set your game console's output format to a progressive signal of 480p, 720p, or higher.
1. Connect the audio cable to your video source's audio-out ports. 2. Connect the other end of the cable to the projector's Audio port or ports. Home Cinema 660/760HD Home Cinema 1060 Note: To add additional sound, connect your video source and speakers to an audio video receiver, then connect the receiver to the projector using one of the receiver's compatible video outputs (an HDMI connection provides the best image quality, if available).
USB Device Projection Connecting a USB Device or Camera to the Projector Selecting the Connected USB Source Disconnecting a USB Device or Camera From the Projector Parent topic: Projector Connections Related topics Projecting a PC Free Presentation USB Device Projection You can project images and other content without using a computer or video device by connecting any of these devices to your projector: •...
2. Connect the USB cable (or USB flash drive) to the projector's USB-A port. Home Cinema 660/760HD Home Cinema 1060 Note: Do not connect a USB hub or a USB cable longer than 10 feet (3 m), or the device may not operate correctly.
2. Press the USB button on the remote control. Parent topic: Connecting to External USB Devices Disconnecting a USB Device or Camera From the Projector When you finish presenting with a connected USB device or camera, you must prepare to disconnect the device from the projector.
Page 47
2. Insert the batteries with the + and – ends facing as shown. 3. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame.
Opening the Lens Cover To open the projector's lens cover, slide the A/V Mute slide lever until it clicks into the open position. Parent topic: Setting Up the Projector...
Optional Equipment and Replacement Parts Installing the Wireless LAN Module To use the projector over a wireless network, install the Epson 802.11b/g/n wireless LAN module in the projector (Home Cinema 660/760HD). Do not install any other type of wireless module.
After you select the wireless network settings for your projector, you can display a QR code on the screen and use it to connect a mobile device using the Epson iProjection app. Note: Make sure you have installed the latest version of Epson iProjection on your device. Visit epson.com/iprojection (U.S.) or...
Page 51
2. Select the Network menu and press Enter. 3. Select Network Configuration and press Enter.
Page 52
4. Select the Basic menu and press Enter. 5. Set the Display LAN Info setting to Text & QR Code. 6. Select Complete and follow the on-screen instructions to save your settings and exit the menus. 7. Do one of the following: •...
Then you can project your presentation and remove the key when you are done. Note: A USB flash drive is not included with your projector. 1. Create a Quick Wireless Connection USB Key with a USB flash drive and the Epson iProjection (Windows/Mac) software.
Page 54
You see a projected message that the network information update is complete. 5. Remove the USB key. 6. Reinsert the wireless LAN module into the projector (Home Cinema 660/760HD). 7. Insert the USB key into a USB port on your computer.
Selecting Wireless Network Settings Manually Before you can project from your wireless network, you must select the network settings for the projector using its menu system. 1. Turn on the projector. 2. Press the Menu button. 3. Select the Network menu and press Enter. 4.
Page 56
• Remote Password lets you enter a password up to 8 alphanumeric characters long for accessing the Remote or Basic Control screen in the Epson Web Control. (Default user name is EPSONREMOTE; default password is guest.) •...
Page 57
• Display LAN Info lets you select how the projector displays network information. You can select an option to display a QR code that lets you quickly connect your iOS or Android devices using the Epson iProjection app. Note: Use the displayed keyboard to enter the name, passwords and keyword. Press the arrow buttons on the remote control to highlight characters and press Enter to select them.
Wireless LAN Menu Settings Setting Options Description Connection Mode Quick Selects the type of wireless connection: Advanced Quick: lets you connect to multiple smartphones, tablets, or computers directly Advanced: lets you connect to multiple smartphones, tablets, or computers via a wireless network access point Search Access Point To Search View...
Setting Options Description SSID Display Selects whether to display the SSID on the network standby screen IP Address Display Selects whether to display the IP address on the network standby screen IPv6 Settings IPv6 Selects the IPv6 settings when you connect the projector to the Auto Configuration network using IPv6 Use Temporary Address...
Setting Up Wireless Network Security You can set up security for your projector to use on the wireless network. Set up one of the following security options to match the settings used on your network: • WPA/WPA2-PSK security (Advanced connection mode) •...
Setting Up Projector Network E-Mail Alerts You can set up the projector to send you an e-mail alert over the network if there is a problem with the projector. 1. Press the Menu button. 2. Select the Network menu and press Enter. 3.
• The email address entered as the From setting • Epson Projector on the subject line • The name of the projector experiencing a problem • The IP address of the affected projector •...
7. If you want this projector to receive broadcasted messages over the network, select the Others menu and turn on the Message Broadcasting setting. Administrators can broadcast messages over the network using Epson Projector Management (Windows only). 8. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.
Page 64
Note: The web setup and control features support Microsoft Internet Explorer 9.0 or later, and Safari on networks that do not use a proxy server for connection. You cannot select all of the projector menu settings or control all projector functions using a web browser. Note: If you set Standby Mode to Communication On in the ECO menu, you can use a web browser to select settings and control projection even if the projector is in standby mode.
Page 65
4. To select projector menu settings, select Advanced to bring up a list of options. Note: You may need to log in to access some of the options on the Web Control screen. If you see a log in window, enter your user name and password. (The default user name is EPSONWEB and the default password is admin.) 5.
Page 66
Selects an HDMI port source Selects the USB Display source Selects the USB device source A/V Mute button control Freeze button control Page Up and Page Down button controls Displays a QR code Volume button controls Selects the network source Selects the Computer port source Selects a Video port source Searches for connected sources...
Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Projector Turning Off the Projector Selecting the Language for the Projector Menus Adjusting the Image Height Image Shape Resizing the Image with the Zoom Ring Focusing the Image Using the Focus Ring Remote Control Operation Selecting an Image Source...
Page 68
2. Connect the power cord to the projector's power inlet. 3. Plug the power cord into an electrical outlet. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. 4. Press the power button on the projector or the remote control to turn on the projector. The projector beeps and the Status light flashes blue as the projector warms up.
• If the Home screen is displayed, select the source you want to project. Using the Home Screen Parent topic: Using Basic Projector Features Related tasks Selecting an Image Source Using the Home Screen You can select input sources and other frequently used options from the Home screen. 1.
Display the Help screen Display the projector's menus Select customizable menu options Depending on the projector, select to project two images from different image sources simultaneously or change the Power Consumption setting Correct the image shape Note: Your Home screen may look different from the illustration shown here. You can select the customizable menu options using the Custom Function 1 and Custom Function 2 settings in the Extended menu.
Page 71
2. Press the power button again. (To leave it on, press any other button.) The projector beeps twice, the lamp turns off, and the Status light turns off. Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away (if necessary).
4. Close the projector's lens cover. Parent topic: Using Basic Projector Features Related references Projector Light Status Selecting the Language for the Projector Menus If you want to view the projector's menus and messages in another language, you can change the Language setting.
3. Select the Extended menu and press Enter. 4. Select the Language setting and press Enter. 5. Select the language you want to use and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Using Basic Projector Features Adjusting the Image Height If you are projecting from a table or other flat surface, and the image is too high or low, you can adjust the image height using the projector's adjustable feet.
The foot extends from the projector. 3. Release the lever to lock the foot. 4. If the image is tilted, rotate the rear feet to adjust their height. If the projected image is unevenly rectangular, you need to adjust the image shape. Parent topic: Using Basic Projector Features Image Shape...
Note: To provide the best possible image quality, adjust the projector's position to correct the image shape. If this isn't possible, use the horizontal keystone slider on the projector to correct the image shape. 1. Turn on the projector and display an image. Note: You can display a pattern to aid in adjusting the projected image using the Settings menu.
Page 76
2. Press one of these keystone buttons on the control panel to display the Keystone adjustment screen. 3. Press a keystone button on the projector's control panel to adjust the image shape.
Page 77
Home Cinema 660 Home Cinema 760HD/1060 Note: The horizontal keystone adjustment buttons are labeled Wide and Tele on the Home Cinema 660. After correction, your image is slightly smaller. Note: If the projector is installed out of reach, you can also correct the image shape with the remote...
Parent topic: Image Shape Related references Projector Feature Settings - Settings Menu Correcting Image Shape with Quick Corner You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides. Note: To provide the best possible image quality, adjust the projector's position to correct the image shape.
Page 79
3. Select the Settings menu and press Enter. 4. Select the Keystone setting and press Enter. 5. Select the Quick Corner setting and press Enter. Then press Enter again. You see the Quick Corner adjustment screen: 6. Use the arrow buttons on the projector or the remote control to select the corner of the image you want to adjust.
Note: You can display a pattern to aid in adjusting the projected image using the Settings menu. Note: You can also display the pattern by pressing the User button on the remote control (if the test pattern is assigned to this button). 2. To sharpen the image focus, rotate the projector’s focus ring. Home Cinema 660...
Home Cinema 760HD/1060 Parent topic: Using Basic Projector Features Remote Control Operation The remote control lets you control the projector from almost anywhere in the room. You can point it at the screen, or the front or back of the projector. Make sure that you aim the remote control at the projector's receivers within the distance and angles listed here.
30° 19.7 feet (6 m) 15° Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you will not use the remote control for a long time, remove the batteries.
4. Use the following buttons on the remote control to control your presentation: • To move through slides or pages, press the up or down Page buttons. • To move the cursor on the screen, use the arrow buttons. • To left-click, press the button once (press it twice to double-click).
1. Press the Pointer button on the remote control. 2. Use the arrow buttons on the remote control to move the pointer on the screen. 3. Press Esc to clear the pointer from the screen. Parent topic: Remote Control Operation Related references Projector Feature Settings - Settings Menu Selecting an Image Source...
Page 85
3. Do one of the following: • Press the Source Search button on the projector or remote control until you see the image from the source you want. • Press the button for the source you want on the remote control. Computer port sources Video, HDMI, and MHL (Home Cinema 1060) sources USB port sources (computer display and external devices)
• Press the Home button on the remote control or projector and select your image source. Note: Your Home screen may look different from the illustration shown here. Parent topic: Using Basic Projector Features Projection Modes Depending on how you positioned the projector, you may need to change the projection mode so your images project correctly.
Changing the Projection Mode Using the Remote Control You can change the projection mode to flip the image over top-to-bottom. 1. Turn on the projector and display an image. 2. Hold down the A/V Mute button on the remote control for five seconds. The image disappears briefly and reappears flipped top-to-bottom.
3. Select the Extended menu and press Enter. 4. Select the Projection setting and press Enter. 5. Select a projection mode and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Projection Modes Image Aspect Ratio The projector can display images in different width-to-height ratios called aspect ratios.
2. Press the Aspect button on the remote control. The shape and size of the displayed image changes, and the name of the aspect ratio appears briefly on the screen. 3. To cycle through the available aspect ratios for your input signal, press the Aspect button repeatedly.
Displays images using the full width of the projection area and maintains the aspect ratio of the image. Native Displays images as is (aspect ratio and resolution are maintained). Home Cinema 660 Aspect ratio setting Description Auto Automatically sets the aspect ratio according to the input signal and the Resolution setting.
Parent topic: Using Basic Projector Features Changing the Color Mode You can change the projector's Color Mode using the remote control to optimize the image for your viewing environment. 1. Turn on the projector and switch to the image source you want to use. 2.
Turning On Auto Iris In certain color modes, you can turn on the Auto Iris setting to automatically optimize the image based on the brightness of the content you project. 1. Turn on the projector and switch to the image source you want to use. 2.
Controlling the Volume with the Volume Buttons You can use the Volume buttons on the remote control to adjust the volume as you project a presentation with audio. You can also use the volume buttons on the projector's control panel (Home Cinema 760HD/1060).
File type and Details extension Image (.jpg) Make sure the file is not: • CMYK format • Progressive format • Highly compressed • Above 8192 × 8192 resolution Image (.bmp) Make sure the file resolution is not above 1280 × 800 Image (.gif ) Make sure the file is not: •...
Page 95
The PC Free screen appears. 2. Do the following as necessary to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button. •...
4. While projecting, use the following commands to control the display as necessary: • To rotate a displayed image, press the up or down arrow button. • To move to the next or previous image, press the left or right arrow button. 5.
2. Do the following as necessary to locate your files: • If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button. • To move back up a folder level on your device, highlight Back to Top and press Enter. •...
Page 98
Setting Options Description Display Order Name Order Displays files in name order Date Order Displays files in date order Sort Order In Ascending Sorts files in first-to-last order In Descending Sorts files in last-to-first order Continuous Play Displays a slide show continuously Displays a slide show one time through Screen Switching Does not display the next file automatically...
Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture and Sound Temporarily Stopping Video Action Temporarily Zooming Into and Out of Images Projector Security Features Projector Identification System for Multiple Projector Control Projecting Two Images Simultaneously Copying Menu Settings Between Projectors Shutting Off the Picture and Sound Temporarily...
Note: You can also stop projection using the A/V Mute slide lever on the projector. Parent topic: Adjusting Projector Features Related references Projector Setup Settings - ECO Menu Related tasks Saving a User's Logo Image to Display Stopping Video Action Temporarily You can temporarily stop the action in a video or computer presentation and keep the current image on the screen.
Zooming Into and Out of Images You can draw attention to parts of a presentation by zooming into a portion of the image and enlarging it on the screen. 1. Press the E-Zoom + button on the remote control. You see a crosshair on the screen indicating the center of the zoom area. 2.
Projector Security Features You can secure your projector to deter theft or prevent unintended use by setting up the following security features: • Password security to prevent the projector from being turned on, and prevent changes to the startup screen and other settings. •...
Page 103
1. Hold down the Freeze button on the remote control for about five seconds or until you see this menu. 2. Press the down arrow to select Password and press Enter. You see the prompt "Change the password?". 3. Select Yes and press Enter. 4.
Parent topic: Password Security Types Related tasks Selecting Password Security Types Selecting Password Security Types After setting a password, you see this menu, allowing you to select the password security types you want to use. If you do not see this menu, hold down the Freeze button on the remote control for about five seconds or until the menu appears.
Entering a Password to Use the Projector If a password is set up and a Power On Protection password is enabled, you see a prompt to enter a password whenever you turn on the projector. You must enter the correct password to use the projector. 1.
• If you continue to enter an incorrect password many times in succession, the projector displays a request code and a message to contact Epson Support. Do not attempt to enter the password again. When you contact Epson Support, provide the displayed request code and proof of ownership for assistance in unlocking the projector.
Page 107
2. Press the Menu button, select the Extended menu, and press Enter. 3. Select the User's Logo setting and press Enter. You see a prompt asking if you want to use the displayed image as a user's logo. 4. Select Yes and press Enter. You see a selection box overlaying your image.
You see the User's Logo zoom factor menu. 7. Select a zoom percentage and press Enter. You see a prompt asking if you want to save the image as the User's Logo. 8. Select Yes and press Enter. You see a completion message. 9.
2. Select the Settings menu and press Enter. 3. Select Lock Setting and press Enter. 4. Select the Control Panel Lock setting and press Enter. 5. Select one of these lock types and press Enter: • To lock all of the projector's buttons, select Full Lock. •...
• Use the security slot on the projector to attach a Kensington lock. See your local computer or electronics dealer for purchase information. • Use the security cable attachment point on the projector to attach a wire cable and secure it to a room fixture or heavy furniture.
2. Select the Extended menu and press Enter. 3. Select Projector ID and press Enter. 4. Press the arrow buttons on the remote control to select the identification number you want to use for the projector. Then press Enter. Repeat these steps for all the other projectors you want to operate from one remote control. Note: If you don't know the projector's ID, aim the remote control at the projector and press the ID button to temporarily display the projector's ID on the screen.
2. Make sure you know the projector's ID number as set in the Extended menu Projector ID setting. Note: If you have forgotten the projector's ID, aim the remote control at the projector and press the ID button to temporarily display the projector's ID on the screen. If you turn off the Projector ID setting, the remote control will operate the projector regardless of the ID selected on the remote.
Page 113
4. Press the Menu button, select the Image menu, and press Enter. 5. Select settings as necessary. 6. Set the remote control ID to match the next projector, then select Image menu adjustments as necessary to match the projectors' displays. Note: The brightness and tint may not match exactly even after adjustments.
Projecting Two Images Simultaneously You can use the split screen feature to simultaneously project two images from different image sources next to each other (Home Cinema 760HD/1060). You can control the split screen feature using the remote control or the projector menus. Note: You cannot use split screen with certain input source combinations.
Page 115
1. Press the Split button on the remote control. The currently selected input source moves to the left side of the screen. 2. Press the Menu button. You see this screen: 3. To select an input source for the other image, select the Source setting, press Enter, select the input source, select Execute, and press Enter.
Any saved User's Logo setting on the projector will transfer to the other projector. Caution: If the copy process fails due to a power failure, communication error, or for any other reason, Epson will not be responsible for any repair costs incurred. The following settings will not transfer between projectors: •...
Page 117
2. Insert the flash drive into the USB-A port. Home Cinema 660/760HD Home Cinema 1060 Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be saved correctly.
3. Press and hold the Esc button on the control panel or remote control as you connect the power cord to the projector's power inlet. 4. When all of the projector lights turn on, release the Esc button. The lights flash to indicate that settings are transferring to the flash drive. When the lights stop flashing, the power light turns blue and the projector enters standby mode.
Page 119
1. Turn off the projector and unplug the power cord from the projector's power inlet. 2. Insert the flash drive into the USB-A port. Home Cinema 660/760HD Home Cinema 1060 Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be...
3. Press and hold the Menu button on the control panel or remote control as you connect the power cord to the projector's power inlet. 4. When all of the projector lights turn on, release the Menu button. The lights flash to indicate that settings are transferring to the projector. When the lights stop flashing, the power light turns blue and the projector enters standby mode.
Page 121
1. Turn off the projector and unplug the power cord from the projector's power inlet. 2. Connect a USB cable to your projector's USB-B port. Home Cinema 660/760HD Home Cinema 1060 3. Connect the other end to any available USB port on your computer.
4. Press and hold the Esc button on the control panel or remote control as you connect the power cord to the projector's power inlet. 5. When all of the projector lights turn on, release the Esc button. The projector shows up as a removable disk on your computer. 6.
Page 123
Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have to repeat your adjustments. 1. Turn off the projector and unplug the power cord from the projector's power inlet. 2. Connect a USB cable to your projector's USB-B port. Home Cinema 660/760HD...
Page 124
Home Cinema 1060 3. Connect the other end to any available USB port on your computer. 4. Press and hold the Menu button on the control panel or remote control as you connect the power cord to the projector's power inlet. 5.
Page 125
6. Copy the pjconfdata.bin file from your computer to the removable disk. Note: Do not copy any other files to the removable disk. 7. Once the file has copied, do one of the following: • Windows:Open the My Computer, Computer, Windows Explorer, or File Explorer utility. Right-click the name of your projector (listed as a removable disk) and select Eject.
Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Using the Projector's Menus Image Quality Settings - Image Menu Input Signal Settings - Signal Menu Projector Feature Settings - Settings Menu Projector Setup Settings - Extended Menu Projector Network Settings - Network Menu Projector Setup Settings - ECO Menu...
Page 127
1. Press the Menu button on the control panel or remote control. You see the menu screen displaying the Image menu settings.
2. Press the up or down arrow button to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3. To change settings in the displayed menu, press Enter. 4.
Page 129
Setting Options Description Color Mode See the list of available Color Adjusts the vividness of image Modes colors for various image types and environments Brightness Varying levels available Lightens or darkens the overall image Contrast Varying levels available Adjusts the difference between light and dark areas of the image Color Saturation Varying levels available...
Page 130
Setting Options Description Advanced Deinterlacing Sets whether to convert interlaced to progressive signals for certain video image types Off: for fast-moving video images Video: for most video images Film/Auto: for movies, computer graphics, and animation Auto Iris Adjusts the projected luminance based on the image brightness Normal when the Dynamic or Cinema...
Input Signal Settings - Signal Menu Normally the projector detects and optimizes the input signal settings automatically. If you need to customize the settings, you can use the Signal menu. The available settings depend on the currently selected input source. Note: You can restore the default settings of the Position, Tracking, and Sync settings by pressing the Auto button on the remote control.
Page 132
Setting Options Description Sync. Varying levels available Adjusts signal to eliminate fuzziness or flickering in computer images Position Up, down, left, right Adjusts the image location on the screen Auto Setup Automatically optimizes computer image quality (when On) Overscan Auto Changes the projected image ratio to make the edges visible by a selectable percentage or...
Setting Options Description Input Signal Auto Specifies the signal type from input sources connected to computer ports Component Auto: detects signals automatically RGB: corrects color for computer/RGB video inputs Component: corrects color for component video inputs Video Signal Auto Specifies the signal type from the input sources connected to the Various video standards video ports...
Page 134
Align Display the QR Code Zoom Varying levels available Adjusts the size of the projected image (Home Cinema 660) Volume Varying levels available Adjusts the volume of the projector’s speaker system; you can set the volume level for each input source separately...
Page 135
Setting Options Description Remote Receiver Front/Rear Limits reception of remote control signals by the selected receiver; Front Off turns off all receivers Rear User Button Power Consumption Assigns a menu option to the User button on the remote Info control for one-touch access Deinterlacing Closed Caption Test Pattern...
Projector Setup Settings - Extended Menu Settings on the Extended menu let you customize various projector setup features that control its operation. Setting Options Description Home Screen Home Screen Auto Disp. Select various options for the projector's Home screen Custom Function 1 Home Screen Auto Disp.: controls whether Custom Function 2 the Home Screen displays automatically when...
Page 137
Setting Options Description Display Messages Selects various display options Display Background Messages: controls whether messages are displayed on the screen Startup Screen Display Background: selects the screen A/V Mute color or logo to display when no signal is received Startup Screen: controls whether a special screen appears when the projector starts up A/V Mute: selects the screen color or logo to display when A/V Mute is turned on...
Page 138
Setting Options Description Operation Direct Power On Selects various operation options High Altitude Mode Direct Power On: turns on the projector when you plug it in Auto Source Search High Altitude Mode: regulates the projector’s Auto Power On operating temperature at altitudes above 4921 HDMI EQ Setting feet (1500 m) Auto Source Search: automatically detects...
Projector Network Settings - Network Menu Settings on the Network menu let you view network information and set up the projector for monitoring and control over a network. Setting Options Description Wireless Mode Wireless LAN On Turns on wireless LAN mode...
Page 140
MAC Address Region Code IPv6 Display the QR Code — Displays a QR code for connecting with iOS or Android devices using the Epson iProjection app Network Configuration Accesses additional network Configures your network settings menus Parent topic: Adjusting the Menu Settings...
Projector Setup Settings - ECO Menu Settings on the ECO menu let you customize projector functions to save power. When you select a power-saving setting, a leaf icon appears next to the menu item. Setting Options Description Power Consumption Normal Selects the brightness mode of the projector lamp Normal: sets maximum lamp...
Page 142
Setting Options Description Sleep Mode Timer 1 to 30 minutes Sets the interval for Sleep Mode Lens Cover Timer Automatically turns off the projector after 30 minutes if the lens cover is closed A/V Mute Timer Automatically turns off the projector after 30 minutes if A/V Mute is enabled Standby Mode...
Lamp Hours Displays the number of hours (H) the lamp has been used in Normal and ECO Power Consumption modes; if the information is displayed in yellow, obtain a genuine Epson replacement lamp soon Source Displays the name of the port to which the current input source is...
Information item Description Refresh Rate Displays the refresh rate of the current input source Sync Info Displays information that may be needed by a service technician Status Displays information about projector problems that may be needed by a service technician Serial Number Displays the projector's serial number Event ID...
Event ID code Cause and solution 0479 A projector system error has occurred. Turn the projector off and then on again. 04FF 0891 Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID. 0892 The WPA/WPA2 authentication type does not match.
Page 146
You cannot reset the following settings using the Reset All Config option: • Input Signal • User's Logo • Language • Network menu items • Lamp Hours • Password • Zoom (Home Cinema 660) • Display Background • Startup Screen • A/V Mute Parent topic: Adjusting the Menu Settings...
The only parts you should replace are the lamp, air filter, and remote control batteries. If any other part needs replacing, contact Epson or an authorized Epson servicer. Warning: Before cleaning any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except as specifically explained in this manual.
Filter maintenance intervals will depend on the environment. If regular maintenance is not performed, your Epson projector will notify you when the temperature inside the projector has reached a high level. Do not wait until this warning appears to maintain your projector filter as prolonged exposure to high temperatures may reduce the life of your projector or lamp.
Related references Projector Light Status Cleaning the Air Filter and Vents Clean the projector's air filter or vents if they get dusty, or if you see a message telling you to clean them. 1. Turn off the projector and unplug the power cord. 2.
Page 150
3. Pull the air filter out of the projector. Note: Air filters contain ABS resin and polyurethane foam. Dispose of used air filters according to local regulations.
4. Place the new air filter in the projector as shown and push gently until it clicks into place. 5. Close the air filter cover. Parent topic: Air Filter and Vent Maintenance Related references Optional Equipment and Replacement Parts Projector Lamp Maintenance The projector keeps track of the number of hours the lamp is used and displays this information in the projector's menu system.
Parent topic: Projector Maintenance Related references Projector Light Status Projector Information Display - Info Menu Replacing the Lamp Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot. Warning: Let the lamp fully cool before replacing it to avoid injury.
Page 153
4. Slide the lamp cover out and lift it off. 5. Loosen the screws securing the lamp to the projector. The screws do not come all the way out.
Page 154
6. Grasp the raised section of the lamp and gently pull the lamp out of the projector. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. 7.
Page 155
8. Push in the lamp firmly and tighten the screws to secure it. Caution: Do not over-tighten the screws. 9. Replace the lamp cover and tighten the screw to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on.
Reset the lamp timer to zero to keep track of the new lamp's usage. Parent topic: Projector Lamp Maintenance Related references Optional Equipment and Replacement Parts Related tasks Resetting the Lamp Timer Resetting the Lamp Timer You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement message and to keep track of lamp usage correctly.
6. Press Menu or Esc to exit the menus. Parent topic: Projector Lamp Maintenance Related tasks Replacing the Lamp Replacing the Remote Control Batteries The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they run out.
Page 158
3. Insert the batteries with the + and – ends facing as shown. 4. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame.
• When shipping the projector for repairs, place it in its original packing materials, if possible, or use equivalent materials with cushioning around the projector. Mark the box "Fragile." Note: Epson shall not be liable for any damages incurred during transportation. Parent topic:...
• The Help option on the Home screen can display information about common problems, if the projector is operating. • The solutions in this manual can help you solve many problems. If none of these solutions help, you can contact Epson for technical support. Parent topic: Solving Problems...
Projector Light Status The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here. Power light Status light Wireless LAN light (Home Cinema 1060;...
Page 162
• Clean or replace the air filter • If operating the projector at high altitude, turn on High Altitude Mode • If the problem persists, unplug the projector and contact Epson for help...
Page 163
Epson for help Flashing blue Flashing Flashing Auto iris error; turn the projector off, orange orange unplug it, and contact Epson for help Flashing blue Orange Orange Power error; turn the projector off, unplug it, and contact Epson for help...
Wireless LAN is not available; make sure the wireless LAN settings are correct Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help. Parent topic: Solving Problems...
7. When you are finished, do one of the following: • To select another problem to solve, press Esc. • To exit the help system, press Home. Parent topic: Solving Problems Solving Image or Sound Problems Check the solutions in these sections if you have any problems with projected images or sound. Solutions When No Image Appears Solutions When Image is Incorrect Using the USB Display Function Solutions When "No Signal"...
• For images projected with Windows Media Center, reduce the screen size from full screen mode. • For images projected from applications using Windows DirectX, turn off DirectX functions. • If the mouse cursor flickers, select Make the movement of the mouse pointer smooth in the Epson USB Display Settings program on your computer.
• If you are projecting using the 1080p video format and change the computer resolution during projection, the video quality and performance may decline. • Make sure you are using the most recent version of the USB Display software. You can download the latest version from the Epson web site. Go to epson.com/support (U.S.) or epson.ca/support...
1. Hold down the laptop's Fn key and press the key labeled with a monitor icon or CRT/LCD. (See your laptop manual for details.) Wait a few seconds for an image to appear. To display on both the laptop's monitor and the projector, try pressing the same keys again. Note: On Windows 7 or later, hold down the Windows key and press P at the same time, then click Duplicate.
Related references Input Signal Settings - Signal Menu Supported Video Display Formats Solutions When Only a Partial Image Appears If only a partial computer image appears, try the following solutions: • Press the Auto button on the remote control to optimize the image signal. •...
• If you connected an extension power cable, try projecting without it to see if it caused interference in the signal. • If you are using the USB Display function, turn off the Transfer layered window setting in the Epson USB Display Settings program on your computer.
Supported Video Display Formats Solutions When the Image is Fuzzy or Blurry If the projected image is fuzzy or blurry, try the following solutions: • Adjust the image focus. • Clean the projector lens. Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it.
Solutions When the Image Brightness or Colors are Incorrect If the projected image is too dark or light, or the colors are incorrect, try the following solutions: • Press the Color Mode button on the remote control to try different color modes for the image and environment.
• If you are using the USB Display function, turn on the Output audio from the projector setting in the Epson USB Display Settings program on your computer. • If you are using a Mac and you do not hear sound from an HDMI source, make sure your Mac supports audio through the HDMI port.
• If you assigned an ID number to the remote control to operate multiple projectors, you may need to check or change the ID setting (feature not available with all projectors). • If you lose the remote control, you can purchase another from an authorized Epson reseller. Parent topic:...
• If you set a Web Control password and forgot the user ID or password, try entering the following: • User ID: EPSONWEB • Default password: admin • If you set a Remote password (in Epson Web Control) and forgot the user ID or password, try entering the following: • User ID: EPSONREMOTE •...
Solutions When Wireless Authentication Fails If you cannot authenticate a wireless connection, try the following solutions: • Make sure the Wireless Mode setting is set to Wireless Lan On. • Check the Security settings and passphrase in the Network Configuration menu. •...
Epson with your questions. Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Page 178
Purchase Supplies and Accessories You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766) in the U.S. or 800-807-7766 in Canada. Or you can purchase online at epsonstore.com...
Supported Video Display Formats USB Display System Requirements General Projector Specifications Type of display Poly-silicon TFT active matrix Resolution Home Cinema 660: 800 × 600 pixels (SVGA) Home Cinema 760HD: 1280 × 800 pixels (WXGA) Home Cinema 1060: 1920 × 1080 pixels (1080p)
Page 180
Lens Home Cinema 660: F=1.44 Focal length: 16.7 mm Home Cinema 760HD: F=1.49 to 1.72 Focal length: 16.9 to 20.28 mm Home Cinema 1060: F=1.58 to 1.70 Focal length: 18.2 to 29.2 mm Color reproduction Up to 1 billion Brightness...
Page 181
Image size Home Cinema 660: (in native aspect ratio) 23 inches (0.58 m) to 350 inches (8.89 m) Home Cinema 760HD: 33 inches (0.84 m) to 320 inches (8.13 m) Home Cinema 1060: 30 inches (0.76 m) to 300 inches (7.62 m)
Internal sound system 2 W monaural Noise level 37 dB (Normal Power Consumption mode) 28 dB (ECO Power Consumption mode) Keystone correction angle Vertical: ± 30º (manual); ± 30º (using Auto Keystone) Horizontal: ± 30º (manual) USB Type B port compatibility USB 2.0 compliant for USB display or external mouse USB Type A port compatibility One USB 1.1 and 2.0 compliant port for USB device input Parent topic: Technical Specifications...
Power consumption Operating: (100 to 120 V) Home Cinema 660/760HD: Normal Power Consumption mode: 296 W ECO Power Consumption mode: 211 W Standby: 2.0 W (Communication On), 0.2 W (Communication Off) Home Cinema 1060: Normal Power Consumption mode: 315 W ECO Power Consumption mode: 228 W Standby: 2.0 W (Communication On), 0.2 W (Communication Off)
For best results, your computer's monitor port or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically.
Page 186
Display format Refresh rate (in Hz) Resolution (in pixels) WXGA+ 1440 × 900 SXGA 70/75 1152 × 864 1280 × 960 1280 × 1024 SXGA+ 1400 × 1050 Composite video TV (NTSC) 720 × 480 TV (SECAM) 720 × 576 TV (PAL) 50/60 720 ×...
Page 187
Display format Refresh rate (in Hz) Resolution (in pixels) HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 HDTV (1080p) 24/30/50/60 1920 × 1080 Home Cinema 760HD/1060 Display format Refresh rate (in Hz) Resolution (in pixels) Computer signals (analog RGB) 60/72/75/85 640 ×...
FCC Compliance Statement Binding Arbitration and Class Waiver Trademarks Copyright Notice Recycling Epson offers a recycling program for end of life products. Please go to this site for information on how to return your products for proper disposal. Parent topic:...
Important Safety Instructions Follow these safety instructions when setting up and using the projector: • Do not look into the lens when the projector is on. The bright light can damage your eyes. Avoid standing in front of the projector so the bright light does not shine into your eyes. •...
Page 193
• Never allow objects of any kind to enter any openings in the projector. Do not leave objects, especially flammable objects, near the projector. Never spill liquid of any kind into the projector. • If you are using two or more projectors side-by-side, leave at least 2 feet (60 cm) of space between the projectors to allow for proper ventilation.
Page 194
Doing so may cause an unstable display and could lead to projector damage. Do not use or store the projector where it may be exposed to sudden changes in temperature. • Do not store the projector outside of the required temperature range of 14 to 140 °F (–10 to 60 °C) or in direct sunlight for long periods of time.
Restriction of Use When this product is used for applications requiring high reliability/safety such as transportation devices related to aviation, rail, marine, automotive; disaster prevention devices; various safety devices; or functional/precision devices, you should use this product only after giving consideration to including fail- safes and redundancies into your design to maintain safety and total system reliability.
Page 196
Symbol Approved Standards Description IEC60417 Caution, hot surface No.5041 To indicate that the marked item can be hot and should not be touched without taking care. IEC60417 Caution, risk of electric shock No.6042 To identify equipment that has risk of electric shock.
Page 197
Symbol Approved Standards Description — Positioning of cell To identify the battery holder itself and to identify the positioning of the cell(s) inside the battery holder. IEC60417 Protective earth No.5019 To identify any terminal which is intended for connection to an external conductor for protection against electric shock in case of a fault, or the terminal of a protective earth electrode.
Page 198
Symbol Approved Standards Description ISO 3864 Contact prohibition To indicate injury that could occur due to touching a specific part of the equipment. — Never look into the optical lens while the projector is on. — To indicate that the marked item don’t place anything on projector.
1. DISPUTES, BINDING INDIVIDUAL ARBITRATION, AND WAIVER OF CLASS ACTIONS AND CLASS ARBITRATIONS 1.1 Disputes. The terms of this Section 1 shall apply to all Disputes between you and Epson. The term "Dispute" is meant to have the broadest meaning permissible under law and includes any dispute, claim,...
Page 200
1.3 Pre-Arbitration Steps and Notice. Before submitting a claim for arbitration, you and Epson agree to try, for sixty (60) days, to resolve any Dispute informally. If Epson and you do not reach an agreement to resolve the Dispute within the sixty (60) days), you or Epson may commence an arbitration. Notice to Epson must be addressed to: Epson America, Inc., ATTN: Legal Department, 3840 Kilroy Airport Way,...
Page 201
Hearing Format. During the arbitration, the amount of any settlement offer made shall not be disclosed to the arbitrator until after the arbitrator determines the amount, if any, to which you or Epson is entitled. The discovery or exchange of non-privileged information relevant to the Dispute may be allowed during...
Page 202
Epson's last written offer, if any, to settle the Dispute, Epson will: (i) pay you $1,000 or the amount of the award, whichever is greater; (ii) pay you twice the amount of your reasonable attorney's fees, if any;...
Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products.
Notices A Note Concerning Responsible Use of Copyrighted Materials Epson encourages each user to be responsible and respectful of the copyright laws when using any Epson product. While some countries' laws permit limited copying or reuse of copyrighted material in certain circumstances, those circumstances may not be as broad as some people assume.