JVC UX-A52 Service Manual page 25

Cassette section
Head azimuth
adjusting screw
(Forward side)
Playback/Recording &
eraser head
Removing the Cassette Mechanism Assembly
1. Remove the rear cover.
2. Remove the side panels (right and left).
3. Remove the cassette mechanism assembly.
4. Remove the four screws S fastening the cassette mechanism assembly from the back
of the cassette mechanism.
5. Press the EJECT button on the front side of the cassette mechanism assembly to open
the cassette door, and then remove the cassette mechanism assembly.
BIAS TEST POINT
GND
Head azimuth
adjusting screw
(Reverse side)
Playback/Recording &
eraser head
Head azimuth
Head azimuth
adjusting screw
adjusting screw
(Reverse side)
(Forward side)
PCB
UX-A52
FMB
1-25