Download Print this page

For Your Safety - Panasonic VL-SWD273 Installation Manual

Hide thumbs Also See for VL-SWD273:

Advertisement

For your safety

To prevent severe injury and loss of life/
property, read this section carefully
before using the product to ensure
proper and safe operation of your
product.
WARNING
Preventing fire, electric shock and
short circuits
RLeave installation work to the
dealer. Installation work requires
technique and experiences. Failure
to observe this may cause fire,
electric shock, injury, or damage to
the product. Consult the dealer.
RElectrical connection work should
be performed by certified personnel
only. Certification is required for
performing electrical connection
work. Consult your dealer.
RUse only the specified power supply
unit and AC cable.
RDo not attempt to disassemble or
modify this product. Contact an
authorised service centre for repairs.
RNever install wiring during a lightning
storm.
RDo not connect non-specified devices.
RDo not connect a power cable to a
terminal that is not specified in this
guide.
RWhen opening holes in walls for
installation or wiring, or when securing
the power cable, make sure you do not
damage existing wiring and ductwork.
RDo not make any wiring connections
when the power supply is turned on.
2
RDo not use the supplied power supply
unit for outdoor installations (it is for
indoor use only).
RDo not install the main monitor/
extension monitor in the following
places:
– Places where the main monitor/
extension monitor may be splashed
with water or chemicals.
– Places where there is a high
concentration of dust, or high
humidity.
RDo not perform any actions (such as
fabricating, twisting, stretching,
bundling, forcibly bending, damaging,
altering, exposing to heat sources, or
placing heavy objects on the power
cable) that may damage the power
cable. Using the product with a
damaged power cable may cause
electric shock, short circuits, or fire.
Contact an authorised service centre
for repairs.
RWhen existing chime wires are used, it
is possible that they contain AC
voltage.
Contact an authorised service centre.
Preventing accidents and injuries
RDo not install or use the product in
health care facilities if any regulations
posted in the area instruct you not to
do so. Hospitals or health care
facilities may be using equipment that
could be sensitive to external RF
(radio frequency) energy.
RDo not install or use this product near
automatically controlled devices such
as automatic doors and fire alarms.
Radio waves emitted from this product

Advertisement

loading

This manual is also suitable for:

Vl-svd273Vl-mwd273