Editing With Another Vcr - Sony SLV-KA200PL Operating Lnstructions

Editing with another VCR

How to connect to record on this unit
This unit (Recorder)
: Signal flow
To set the AUDIO INPUT MODE (SLV-KA200PL only)
When you connect a commercially available 3-phono to 3-phono type
audio/video cable to the LINE 1 IN jacks, set AUDIO INPUT MODE to
STEREO. If the other VCR is a monaural type, use a commercially available
2-phono to 2-phono type audio/video cable, connect the audio plug to
AUDIO IN L, and set AUDIO INPUT MODE to MONO.
Tip
• You can also use the LINE 2 IN jacks on the front of the unit.
Notes
• Make sure you connect the plugs to jacks of the same colour.
• When connecting the units, do not simultaneously connect the LINE IN and LINE
OUT jacks on your unit with the other VCR. A humming noise may occur if you do
this.
• (SLV-KA200PL only)
The sound is recorded in mono with either type of connection.
LINE 1 IN
Audio/video cable (not supplied)
TV
Other VCR (Player)
LINE OUT
continued
Additional Operations
21