Wi-Fi Protected Setup (Wps) - Epson L1455 User Manual

You see this screen:
9. Scroll down to view the SSID (Wi-Fi network name) and password.
10. Use your computer or wireless device to select the Wi-Fi network name (SSID) displayed on the
LCD screen, then enter the password shown.
11. Press the
You see either an AP, D, or Direct connection symbol on the LCD screen and should be able to
connect to your product directly from your computer or device, and then print. If you are printing from
a computer, make sure you installed the network software as described on the Start Here sheet.
Note: Make a note of the SSID and password that appear.
If the AP, D, or Direct connection symbol is not displayed on the LCD screen, Wi-Fi Direct mode is
not enabled. Repeat these steps to try again.
Parent topic:
Related references
Control Panel Buttons and Lights
Related tasks
Entering Characters on the LCD Screen

Wi-Fi Protected Setup (WPS)

If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
home button to return to the Home screen.
Wi-Fi Direct Mode Setup
47