Basic Operations; Functions Of The Buttons On The Front Panel - Kenwood DNX9170DABS Instruction Manual

Basic Operations

Functions of the Buttons on the Front Panel

DNX9170DABS/ DNX9170S/ DNX9170SM
1 2
NOTE
• The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason,
they may be different from the actual panels.
• In this manual, each model name is abbreviated as follows.
– DNX9170DABS/ DNX9170S/ DNX9170SM:
If above icon is showed, read the article applicable to the unit you use.
Number Name
Remote
1
Sensor
S, R
2
(Volume)
NAV
3
HOME
4
MENU
5
6
G
7
3 4 5 6
• Receives the remote control signal.
• Adjusts volume.
The volume will go up until 15 when you keep pressing R.
• Displays the navigation screen.
• Displays the HOME screen (P.13).
• Pressing for 1 second turns the power off. *
• When the power off, turns the power on.
* The function of the button when held varies depending on the "Manual Power OFF"
setting. (P.67)
• Displays the popup menu screen.
• Pressing for 1 second switches view camera display on/off. (P.61)
– The camera whose view is displayed first changes according to the "Camera
Setup" setting and the shift lever position in the shift gate.
• Switch the APP (CarPlay/ Android Auto/ Air Mirroring) source.
• Pressing for 1 second displays the Voice Recognition screen (P.57).
• Displays the Angle Adjust screen.
– DISC EJECT: Ejects the disc.
– OPEN: Fully opens the panel to the location of the SD card slot.
• When the panel is opened, pressing closes the panel.
• To forcibly eject the disc, press it for 2 seconds and touch [DISC EJECT] after the
message is displayed.
8
9
7
Motion
Basic Operations
7
English