Table of Contents
Advertisement
RUGGEDCOM RSG2300
Installation Guide
For specifications on the available copper Ethernet ports, refer to
Specifications".
Section 3.2
Fiber Optic Ethernet Ports
Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer Registered Jack), LC (Lucent
Connector), SC (Standard or Subscriber Connector) or ST (Straight Tip) connectors. Make sure the Transmit (Tx)
and Receive (Rx) connections of each port are properly connected and matched to establish a proper link.
1
Figure 22: MTRJ Port
1. Tx Connector
2. Rx Connector
1
Figure 24: SC Port
1. Tx Connector
2. Rx Connector
For specifications on the available fiber optic Ethernet ports, refer to
Specifications".
Fiber Optic Ethernet Ports
Pin
4
5
6
7
8
2
Figure 23: LC Port
1. Tx Connector
2
Figure 25: ST Port
1. Tx Connector
Name
10/100Base-TX
1000Base-TX
Reserved (Do
BI_DC+
Not Connect)
Reserved (Do
BI_DC-
Not Connect)
TX-
BI_DB-
Reserved (Do
BI_DD+
Not Connect)
Reserved (Do
BI_DD-
Not Connect)
Section 4.4, "Copper Ethernet Port
1
2. Rx Connector
1
2. Rx Connector
Section 4.5, "Fiber Optic Ethernet Port
Chapter 3
Communication Ports
Description
Transmit Data+
or Bi-Directional
Pair C+
Receive Data-
or Bi-Directional
Pair C-
Transmit Data-
or Bi-Directional
Pair B-
Receive Data-
or Bi-Directional
Pair D+
Receive Data-
or Bi-Directional
Pair D-
2
2
21
Advertisement
Table of Contents
