Fuel And 2-Stroke Engine Oil Mixing Ratio; Transmission Oil; Coolant; Front And Rear Brakes - Yamaha BANSHEE YFZ350W Owner's Manual

EBU19550
Fuel and 2-stroke engine oil mixing
ratio
1
2 Recommended 2-stroke engine oil:
Yamalube "R" (Yamalube Racing 2-cycle oil)
3
Mixing ratio:
24:1
4
If Yamalube "R" oil is not available, select an oil
5
from the following list.
Recommended 2-stroke engine oil
6
Castrol R30
Castrol A545
7
Castrol A747
ECB00140
8
CAUTION:
9
Never mix two types of 2-stroke engine oil in
the same batch. Always use the same type of
10
oil to ensure maximum engine performance.
11
EBU19580

Transmission oil

Make sure that the transmission oil is at the speci-
fied level. Add oil as necessary. (See page 8-9.)
EBU19630

Coolant

Make sure that the coolant is at the specified level.
Add coolant as necessary. (See page 8-11.)
NOTE:
The coolant level must be checked on a cold en-
gine since the level varies with engine tempera-
ture.
EWB00510
Mixing ratio
Wait for the engine and radiator to cool before
removing the radiator cap. You could be
20:1
burned by hot fluid and steam blown out under
pressure. Always put a thick rag over the cap
when opening. Allow any remaining pressure
to escape before completely removing the cap.
EBU19710

Front and rear brakes

Brake lever and brake pedal
G
Check that there is no free play in the brake le-
ver. If there is free play, have a Yamaha dealer
check the brake system.
G
Check for correct brake pedal height. (See
5-4
WARNING