Connecting To The Power Supply - Bosch wfd2473 Operating Instructions And Installation

Connecting to the power supply

8 en
! If the water is discharged via a sink, ensure that the outlet
hose cannot be dislodged. Check also that the water drains
away quickly enough. Ensure that the sink plug is not
preventing drainage. Risk of flooding.
! The appliance must only be connected to an
A.C. mains supply via a correctly installed earthed socket.
! The voltage given on the appliance nameplate
must match that of the power supply where the appliance is
installed.
! The power rating and the fuse or circuit breaker required are
given on the appliance nameplate.
! Check that the socket and the plug on the machine are
compatible, that the cables have a sufficient diameter and
that it is earthed correctly.
! Never use multiple plugs, sockets or connectors or extension
cables.
! If using a residual current-operated circuit breaker, it must
display the 7 symbol. Only this type of protective switch will
ensure compliance with current regulations.
! Remove the appliance plug from the socket, holding onto the
body of the plug.
! In order to fulfil the safety regulations, the plug of the ap
pliance must be accessible for the user; if this cannot be
guaranteed, there must be incorporated in the fixed wiring a
means for disconnection from the supply having a contact
separation of at least 3 mm in all poles