Yamaha BIG BEAR 250 YFM25BZ Owner's Manual page 94

3
1. Adjusting nut
2. Oil filter element cover
3. Bolt
9. Clean the oil strainer and oil filter element with
8
solvent.
1
2
3
1. Oil filter element
2. O-ring
10. Install the oil filter element and a new O-ring.
TIP
Make sure that the O-ring is properly seated.
11. Install the oil filter element cover by installing
the bolts, and then tighten them to the speci-
fied torque.
Tightening torque:
Oil filter element cover bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
8-15