Pppoe - D-Link DWR-922 User Manual

Section 4 - Configuration
Username:
Enter your PPPoE user name.
Password: Enter your PPPoE password.
Service Name: Enter the ISP Service Name (optional).
MTU:
Maximum Transmission Unit - you may need to change the MTU
for optimal performance with your specific ISP.
DNS Setting: Select either Obtain DNS Server address Automatically or Use
the following DNS address.
DNS Addresses: Enter the primary and secondary DNS server addresses.
Enable DHCP-PD:
Check to enable the DHCP-PD feature.
LAN IPv6 Address:
If you did not enable DHCP-PD, enter the LAN (local) IPv6 address.
LAN IPv6 Link- Displays the router's LAN link-local address.
Local Address:
Enable Check to enable the autoconfiguration feature.
Autoconfiguration:
Autoconfiguration Select Stateful (DHCPv6) or SLAAC + Stateless DHCPv6. This will
Type: determine the configuration type for you IPv6 LAN.
IPv6 Address If you selected Stateful (DHCPv6), enter the address range start.
Range (Start):
IPv6 Address If you selected Stateful (DHCPv6), enter the address range end.
Range (End):
D-Link DWR-922 User Manual

PPPoE

31