Fitting Or Removing The Pedestal Stand - Toshiba 32D153*DB Starting Manual

Fitting or Removing the stand
When using a Wall Bracket
Please use a wall bracket appropriate for the size and weight of the LCD TV and two people are required for
installation.
(1) Unplug and remove any cables and/or other component connectors from the rear of the TV.
(2) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket.
(3) Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate
bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the
wall bracket.
Fitting or Removing the stand
(1) Carefully lay the front of the unit face down on a flat, cushioned surface with the stand hanging over the edge.
(2) To fit the stand use the screws supplied.
or
(3) Remove the screws fixing the stand
(4) After the screws are removed, hold the stand in place,then remove the stand and the plastic moulding
from the TV.
Note: Extreme care should always be used when removing the
stand to avoid damage to the LCD panel.
For 32D153*DB / 32W153*DB models
English - 6 -