Table of Contents
Advertisement
Aspect Markers
The camera offers 4 types of onscreen markers that indicate the following commonly-used aspect
ratios: 4:3, 1.66:1, 1.85:1 and 2.39:1. Use the aspect markers to make sure the subject is correctly
framed and within the appropriate safe area.
Aspect marker 2.39:1, gray (default)
1 Open the [Activate] submenu to activate the aspect
markers.
[Other Functions] > [Aspect Marker] > [Activate]
2 Select [On] and then press SET.
• To check the aspect marker on the shooting screen, press
the MENU button to close the menu. If necessary, press
the MENU button again to return to the menu and change
the aspect marker's settings.
To change the aspect marker's settings
1 Open the [Color] submenu to select the aspect
marker's color.
[Other Functions] > [Aspect Marker] > [Color]
2 Select [Black], [Gray] or [White] and then press SET.
3 Open the [Ratio] submenu to select the aspect ratio.
[Other Functions] > [Aspect Marker] > [Ratio]
4 Select the desired aspect ratio and then press SET.
NOTES
• If you set an assignable button to [Aspect Marker] (A 50), you can press the button to turn the
aspect marker on and off.
Aspect Markers
Aspect marker 4:3, white
[Other Functions]
[Aspect Marker]
[Activate]
[Off]
[Other Functions]
[Aspect Marker]
[Color] ..... [Gray]
[Ratio] ..... [2.39:1]
47
Advertisement
Table of Contents
