Miele DA 3360 Operating And Installation Instructions page 20

Installation
a 1 exhaust connection
for exhaust ducting C 150 mm.
b 1 reducing collar
for exhaust ducting C125 mm.
c 1 non-return flap
for fitting into the exhaust socket
(only for air extraction mode).
d 2 brackets
to support the appliance in the wall
unit.
e 1 spacer strip
to conceal the gap between the rear
of the appliance and the wall.
f Conversion kit for recirculation
mode
including exhaust grille and flexible
aluminium hose with clips (the
conversion kit is not supplied with
the rangehood but is available as an
optional extra; see "Technical data").
g DML 400 installation kit (available
as an optional accessory)
contains hinging and screws for
attaching a lightshield to match
kitchen furniture (lightshield not
supplied with rangehood but is
available as an optional extra).
20
12 screws 4 x 15 mm
for securing the rangehood into the wall
unit.
8 screws M4 x 12 mm
for securing the rangehood to the
brackets.
4 of the screws can be used instead of
the plastic rivets to secure the spacer
strip.
4 plastic rivets
for securing the spacer strip to the rear
of the appliance.