Descaling Phase
9
Press the "
" button to start the descaling cycle.
10
The machine will start dispensing the descaling solution at regular
intervals for about 20 minutes. The bar on the control panel shows the
cycle progress.
Note:
The descaling cycle may be paused by pressing the "
resume the cycle, press the "
container or to leave the machine unattended for a short time.
11
When this icon is displayed, the water tank is empty.
12
Remove the water tank, rinse it and fi ll it with fresh water up to the
CALC CLEAN level. Put it back into the machine.
13
Empty the drip tray and the coff ee grounds drawer and place them
back.
14
Empty the container and place it back under both the steam/hot water
wand and the coff ee dispensing spout.
" button. To
" button. This allows you to empty the
ENGLISH
51
51