Panasonic Diga Blu-ray DMR-BCT950 Operating Instructions Manual page 24

Getting started
Settings
Easy Network Setting
After completing "Easy Setting", you can continue
with "Easy Network Setting".
Select "Wired" or "Wireless", then press [OK].
Easy Network Setting
Settings and tests for connection required
for home network and the Internet will be
conducted.
First, please select a connection mode.
Current setting : Wired
LAN cable connection:
Connect a LAN cable to the unit and select "Wired".
Wireless LAN connection:
Select "Wireless".
Wired
Wireless
OK
RETURN
"Wired" connection
Follow the on-screen instructions to apply your
connection settings.
"Wireless" connection
Before beginning wireless connection setup
• Obtain your network name (SSID
• If your wireless connection is encrypted, please
be sure that you know your encryption key.
Select "Search for wireless network" or "WPS
(PUSH button)" and press [OK], then follow the
on-screen instructions and apply the settings.
24
SQT0802
Search for wireless network:
The available wireless networks will be displayed.
Select your network name and press [OK].
- If your Network name is not displayed, search
again by pressing the red button on the remote
control.
- Stealth SSID will not be displayed. Enter
manually by using "Wireless Settings". (
• If your wireless network is encrypted, Encryption
Key Input Screen will be displayed.
Input the encryption key of your network.
WPS (PUSH button):
If your Wireless router supports WPS (PUSH
button), you can easily perform the settings by
pressing WPS button on it.
WPS (Wi-Fi Protected Setup™) is a standard that
facilitates settings relating to the connection and
).
§1
security of wireless LAN devices.
1 Press WPS button or corresponding button of
Wireless router until the lamp starts flashing.
• For details, refer to the operating instructions
2 Press [OK].
e.g.,
of Wireless router.
※ 2
94)