Samsung MultiXpress X703 Series User Manual page 359

Wireless network setup (Optional)
IP setting using SetIP Program (Windows)
This program is used to manually set the network IP address of your machine
using its MAC address to communicate with the machine. The MAC address is
the hardware serial number of the network interface and can be found in the
Network Configuration Report.
See "Network settings (configuring TCP/IP)" on page 340.
Configuring the machine's wireless network
Before starting you will need to know the network name (SSID) of your wireless
network and the network key if it is encrypted. This information was set when
the access point (or wireless router) was installed. If you do not know about your
wireless environment, please ask the person who set up your network.
To configure wireless parameters, you can use SyncThru™ Web Service.
Using SyncThru™ Web Service
Before starting wireless parameter configuration, check the cable connection
status.
1 Check whether or not the network cable is connected to the machine. If
not, connect the machine with a standard network cable.
2 Start a web browser such as Internet Explorer, Safari, or Firefox and enter
your machine's new IP address in the browser window.
For example,
3 Click Login on the upper right of the SyncThru™ Web Service website.
4 Type in the ID and Password.
Use the same login ID, Password, Domain as when logging in from the
machine (see "Log-in" on page 313.)
If you want to create a new user or change the password, see "Security tab"
on page 187.
5 When the SyncThru™ Web Service window opens, click Network
Settings.
6 Click Wi-Fi > Wizard.
Select the one Network Name(SSID) in the list.
7
359
3. Network Setup