Deactivating/Disconnecting The Wlan Device; Configuring The Wireless Lan; Configuring The Wlan Using Windows - Fujitsu LIFEBOOK E546 Operating Manual

Appendix
• Microwave ovens may interfere with the operation of WLAN devices since they operate in the
same 2.4 GHz frequency range as IEEE802.11b/g/n devices. Interference by microwaves
does not occur with IEEE802.11a radio which operates in the 5 GHz RF band.
• Wireless devices that transmit in the 2.4 GHz range may interfere with operation of WLAN
devices in IEEE802.11b/g/n modes. Symptoms of interference include reduced throughput,
intermittent disconnects, and many frame errors. It is HIGHLY recommended that these
interfering devices be powered off to ensure proper operation of the WLAN device.

Deactivating/Disconnecting the WLAN Device

Disconnecting the WLAN device may be desired in certain circumstances (to extend battery
life) or where certain environments require it (i.e. hospitals, clinics, airplanes, etc.). The
WLAN device can be disconnected in Windows using the WLAN icon in the system tray
(Note that disconnecting via the icon in the system tray does not turn off the radio; it
continues to transmit and receive even though it's not connected.)
► Press the
WirelessLAN Bluetooth WirelessLAN Bluetooth
The wireless component indicator will go off when the wireless components are switched off.
Configuring the Wireless LAN
The optional WLAN device can be configured to establish wireless network connectivity
using the software that is built into Windows. Support for most industry standard
security solutions is contained in this software.
Pre-defined parameters will be required for this procedure. Please consult with
your network administrator for these parameters:
Configuring the WLAN Using Windows
The WLAN device can be configured to establish a wireless network connection using the software
integrated in Windows. The software supports the current industry-standard security solutions.
Pre-defined parameters are required for this procedure. Consult your network
administrator for these parameters:
1. Windows 10: Press in the Start Modem screen the keyboard shortcut
+ and select Control Panel in the menu.
Windows X
2. Windows 7: Select Control Panel in the Start menu.
3. When the display type "Details" is set in the Control Panel, select the icon view
and then click the icon Network and Sharing Center.
4. Select Setup a new connection or network.
5. Depending upon what type of connection you would like to make, make a selection. For
an infrastructure network, select Manually connect to a wireless network.
6. Enter the required information. It may be necessary to consult with your network
administrator for some of the information.
7. In the event you require assistance, go to the Network and Sharing Center window (Control
Panel > Network and Sharing Center), and type in relevant keywords in the Search box.
92
button to start the WirelessSelector.
Fujitsu