Charging A Rechargeable Battery - Panasonic WX-LT350 Operating Instructions Manual

Charging a rechargeable battery

WX-LT350
BATT
PWR
1
[PWR/MUTE]
button
1
Turn off all microphones.
2
Connect the power cable to the input terminal of the battery charger (WX-LZ150).
3
Connect the power plug of the power cable to the AC outlet.
4
Connect the DC plug of the charger to the DC input terminal of the microphone.
When inserting the DC plug into the DC input terminal, align the triangle mark (D) of the
DC plug with that (D) of the microphone.
To charge two microphones at the same time, connect one DC plug each to the DC input
terminals. To charge one microphone at a time, leave the free DC plug lying nearby.
After connecting the microphone to the charger, the charge indicator (red) indicates the
charging status as follows:
ON: Charging.
OFF: Charging completed, or no battery installed.
Blinking: Indicates one of the following conditions.
• A dry cell or deteriorated rechargeable battery is installed. Install a rechargeable bat-
tery instead of a dry cell, or a new rechargeable battery.
• The temperature of the battery may be out of the acceptable range. Confirm that the
temperature is within the acceptable range.
5
When charging is completed, disconnect the power plug from the AC outlet.
22
Charge indicator
CHG
4
DC plug
DC input terminal
Input terminal
2
Battery Charger
Power cable
WX-LZ150
(Plug type differs depending
on the locality.)
3
To AC outlet
5
Power plug