Multi-Ssid - D-Link DAP-3662 User Manual

Section 3 - Configuration
The device supports up to eight multiple Service Set Identifiers. You can set the Primary SSID in the Basic > Wireless section. The SSID's factory
default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. When
the information for the new SSID is finished, click the Add button. Click the Save button to let your changes take effect.
Enable Multi-SSID:
Check to enable support for multiple SSIDs.
Enable Priority: Check to enable the priority feature.
Band: This read-only value is the current band setting.
Index: You can select up to seven multi-SSIDs. With the
Primary SSID, you have a total of eight multi-SSIDs.
SSID: Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN). The
SSID's factory default setting is
be easily changed to connect to an existing wireless
network.
SSID Visibility: Enable or Disable SSID visibility. Enabling this feature
broadcasts the SSID across the network, thus making
it visible to all network users.
Security: The Multi-SSID security can be Open System,
WPA-Personal, WPA-Enterprise, or 802.1X. For a
detailed description of the Open System parameters
please go to page 23. For a detailed description of
the WPA-Personal parameters please go to page
24. For a detailed description of the WPA-Enterprise
parameters please go to page 25. For a detailed
description of the 802.1X parameters please go to
page 26.
D-Link DAP-3662 User Manual

Multi-SSID

dlink. The SSID can
34