Bosch exxcel 1100 Instruction Manual And Installation Instructions page 22

"Ready in/Start in"
displays and"Start
in" button.
22
"Ready in" display
q Turn the programme selector to the desired pro
gramme.
The "Ready" indicator light is on.
The expected "Ready in" time (programme dura
tion) is displayed, e.g. "1:58".
i The "Ready in" time is displayed in hours and mi
nutes, e.g.
1:58 - 1 hour and 58 minutes
0:55 - 55 minutes.After the programme starts,
the "Ready in" time is counted down by minutes.
When the programme ends, the displays shows "0".
i At the start of the programme, a projection of the
"Ready in" time occurs under the assumption of a
full load and a water supply temperature of 15 C.
The actual load will be determined within the first
10 minutes.
The "Ready in" time can become increased or re
duced while the programme is running for the fol
lowing reasons.
Reductions in time occur because of:
- Small loads,
- Selection of an additional option, e.g. "I Redu
ced Time", after the programme has started.
Increases in time occur because of:
- An additional rinse cycle if excessive foam is in the
laundry,
- Multiple spinning if the laundry is distributed poorly
in the drum,
- Increased heating times, e.g. when the water is
too cold,
- Water pressure too low,
- Selection of an additional option, e.g. "K Rinse
Plus" after the programme has started,
- Very absorbent laundry.