Select Network setting.
2.
3.
Press
available Wi-Fi hotspots then press
hotspot you would like to connect to.
4.
Press
Refer to the control panel grid when navigating the keyboard to
input the Wi-Fi hotspot's password then press Enter.
NOTE: The P3B LED projector supports WPA/WPA2-enabled devices.
Press OK to start the Wi-Fi connection between the Wi-Fi
5.
hotspot and your LED projector.
6.
Repeat the same steps under Using ASUS WiFi Projection to
connect input devices to the LED projector.
LED projector E-Manual
to scroll up or
to launch the onscreen display menu's keyboard.
to scroll down the list of
to select the Wi-Fi
67