Panasonic KX-TG8011E Operating Instructions Manual page 29

TG8011E(e).book Page 29 Tuesday, June 23, 2009 8:50 AM
L When the handset has been
registered successfully, w stops
flashing.
Note:
L When you purchase an additional
handset, refer to the additional
handset's installation manual for
registration.
Selecting a base unit
When "Auto" is selected, the handset
automatically uses any available base
unit it is registered to. When a specific
base unit is selected, the handset makes
and receives calls using that base unit
only. If the handset is out of range of that
base unit, no calls can be made.
1
K (middle soft key) i N i
M
2
{V}/{^}: "Select Base" i M
3
{V}/{^}: Select the desired base
unit number, or "Auto". i M
L The handset starts searching for
the base unit.
Deregistering a handset
A handset can cancel its own
registration (or the registration of
another handset) that is stored in the
base unit. This allows the handset to end
its wireless connection with the system.
1
K (middle soft key) i < i
M
2
{3}{3}{5}
3
{V}/{^}: "Deregistration" i
M
L The numbers of all handsets
registered to the base unit are
displayed.
4
Select the handset(s) you want to
cancel by pressing the desired
handset number. i M
L The selected handset number(s)
flashes.
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
Programming
L To cancel a selected handset
number, press the number again.
The number stops flashing.
5
{V}/{^}: "Yes" i M
L A confirmation tone sounds as
each handset number
disappears.
L The handset does not beep when
cancelling its own registration.
6
{ih}
Cancelling a base unit
A handset can cancel a base unit that it
is registered to. This allows the base unit
to end its wireless connection with the
system.
1
K (middle soft key) i N i
M
2
{V}/{^}: "Registration" i
M
3
{3}{3}{5}
4
{V}/{^}: "Cancel Base" i M
5
Select the base unit(s) you want to
cancel by pressing the desired base
unit number. i M
L The selected base unit number(s)
flashes.
L To cancel a selected base unit
number, press the number again.
The number stops flashing.
6
{V}/{^}: "Yes" i M i {ih}
Note:
L To register a handset to another base
unit or to the same base unit again,
see page 28.
Increasing the range of the
base unit
You can increase the signal range of the
base unit by using a DECT repeater.
Please use only the Panasonic DECT
repeater noted on page 4. Contact your
Panasonic dealer for details.
29