Table of Contents
Advertisement
Tank Wire, LP Tank, Grease Clip and Battery
10
and ignitor Button Assembly
Place LP tank into hole in base with tank valve facing
toward front of grill.
To secure LP tank, pull tank wire over the side of the tank,
toward the tank collar.
See Use and Care section for connection of regulator to LP tank.
Hang grease clip beneath grill bottom. See inset below. To collect
grease, hang an empty soup can (not included) from grease clip.
Insert AAA battery ("+" end first) into ignition module, then twist
ignitor button onto module.
CAUTION
• Tank collar opening must face to front of cart once
tank is attached.
• Failure to install tank correctly may allow gas hose to
be damaged in operation, resulting in the risk of fire.
Pull tank wire
over tank.
Rear view of grill.
Rear view of grill.
Grease Clip
See Use & Care section of this manual to perform the "Burner
Flame Check" and for important safety instructions before using.
16 • 463845504
Tank Collar
LP Tank
(Sold
Separately)
CAUTION
Failure to install can in clip will cause hot
grease to drip from bottom of grill with risk of
fire or property damage.
s LP GAS TANK IS SOLD SEPARATELY. Fill and leak-check
tank before attaching to grill and regulator. See Use and
Care section for instructions.
Tank Wire
Ignition Module
AAA Battery
Ignitor Button
–
+
Advertisement
Table of Contents
