LG LWC1031DAG Manual page 17

3. Loosely assemble the sill support using the parts
in 24.
Figure
4. Select the position that will place the sill
support near the outer most point on sill
(See 24)
Figure
NOTE: Be careful when you install the cabinet (frame
guides are broken easily).
5. Attach the sill support to the cabinet track hole in
relation to the selected position using
2 Type A screws in each support (See
6. The cabinet should be installed with a very slight
tilt(about 1 / ") downward toward the outside (See
2
26).
Figure
Adjust the bolt and the nut of sill support for
balancing the cabinet.
7. Attach the cabinet to the window stool by
driving the screws (Type B: Length sixteen
millimeters and below.) through the front angle into
window stool (5/8").
8. Pull each Frame curtain properly to each window
sash track, and repeat step 2.
9. Attach each Frame curtain to the window sash by
using screws (Type C).
(See 27)
Figure
Copyright ©2007 LG Electronics. Inc. All right reserved.
Only for training and service purposes
INDOOR
12
).
Figure 25
INDOOR
Screw(Type B)
Sill support
- 17 -
Nut
Bolt 3
5
Frame Guide Screw(Type A)
Screw(Type A)
6
Sill support
Front Angle
Screw(Type B)
2
OUTDOOR
Sill Support
2
Figure 24
4
Cabinet
OUTDOOR
Figure 25
5
2
Sash track
Figure 26
6
Type C
7
Figure 27
LGE Internal Use Only