Connecting The Antenna (Aerial); Step 3: Preparing For Network Connection - Sony BDV-NF7220 Operating Instructions Manual

Connecting the antenna
(aerial)
FM wire antenna (aerial)
(supplied)
Note
• Be sure to fully extend the FM wire
antenna (aerial).
• After connecting the FM wire antenna
(aerial), keep it as horizontal as possible.
Tip
If you have poor FM reception, use a
75-ohm coaxial cable (not supplied) to
connect the main unit to an outdoor FM
antenna (aerial).
Step 3: Preparing for
Network Connection
To connect the system to your network,
perform [Easy Network Settings]. For
details, see "Step 4: Performing the Easy
Setup" (page 22).
Select the method based on your LAN
(Local Area Network) environment.
• If you use a wireless LAN
or
• If you use a wired LAN
Tip
The system has built-in Wi-Fi, and you
can connect the system to the network
by making the network settings.
Use a LAN cable to connect to the LAN
(100) terminal on the main unit.
Broadband router
LAN cable (not supplied)
Tip
We recommend that you use a shielded
and straight interface cable (LAN cable).
21
GB