Connecting To A Wireless Network - Samsung ME95C User Manual

3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
How to set up manually
1
Network Settings screen. Select Start, press E, and then press E again.
Go to the
2
The network test screen appears and the verification process starts. Press Stop. The verification
process stops.
3
Select IP Settings on network connection screen. The
4
Select the field at the top, press E, and then set
IP Address.
process for each field in the
― Setting
IP Setting Enter manually
to
5
When done, select OK at the bottom of the page, and then press E. The network test screen
appears and the verification process starts.
6
When the connection has been verified, the
completed." message appears.
IP Settings screen appears.
IP Setting to Enter manually. Repeat the entry
DNS setting Enter
automatically changes to
"Wired network and Internet connection

Connecting to a Wireless Network

The LAN Port on the Wall
Samsung recommends using IEEE 802.11n. When you play video over a network connection, the video
may not play smoothly.
― Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the
wireless IP sharer is currently being used by another device nearby, this will result in interference and
communication failure.
― Your product supports only the following wireless network security protocols.
If you select the Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to
manually.
WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless router, Samsung products will not support a
connection in compliance with new Wi-Fi certification specifications.
― If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC
(Push Button Configuration) or PIN (Personal Identification Number). WPS will automatically configure
the SSID and WPA key in either mode.
― Connection Methods: You can setup the wireless network connection in three ways.
Auto Setup (Using the Auto Network Search function), Manual Setup,
Wireless IP sharer
(router having DHCP server)
LAN Cable
WPS(PBC)
116