LG SoundPlate lab550h Owner's Manual page 54

54 Operating
,
Note
y When using Bluetooth® technology, you
have to make a connection between the
unit and the Bluetooth® device as close as
possible and keep the distance.
However it may not work well in the case
below :
- There is a obstacle between the unit and
the Bluetooth® device.
- There is a device using same frequency
with Bluetooth® technology such as a
medical equipment, a microwave or a
wireless LAN device.
y You should connect your Bluetooth® device
to this unit again when you restart it.
y When you select Bluetooth® function
again after changing to other functions,
Bluetooth® connection may be
disconnected. You should reconnect the
Bluetooth® device to use this function.
4
y The sound may be interrupted when the
connection is interfered with by other
electronic waves.
y You cannot control the Bluetooth® device
with this unit.
y Pairing is limited to one Bluetooth® device
per one unit and multi-pairing is not
supported.
y Depending on the type of the device, you
may not be able to use the Bluetooth®
function.
y You can enjoy wireless system using phone,
MP3, Notebook, etc..
y The more distance between the unit and
the Bluetooth® device, the lower the sound
quality becomes.
y Bluetooth® connection will be disconnected
when the unit is turned off or the Bluetooth®
device gets far from the unit.
y When Bluetooth® connection is
disconnected, connect the Bluetooth®
device to the unit again.
y When not connected the Bluetooth®, "BT
READY" appears on the display window.