Table of Contents
Advertisement
setup screen
IPv6 use : Specify the use of IPv6.
Mode : If you select <IPv6 use>, the mode is enabled.
IPv6 address : Obtains the IPv6 address to access the IPv6 network.
4.
When done, click [Apply (
J
The IP address allocation will be restored to the default DHCP. At the moment, if it fails to detect a
DHCP server within 1 minute, the address will be reverted to the previous setting automatically.
Port
1.
From the Setup menu, select the
<Network (
2.
Click <Port>.
3.
Type in each item in the Port menu as
necessary.
Neither the port range between 0 and 1023
nor port 3702 is available.
HTTP port : HTTP port used to
access the network encoder via the
web browser.
The default is 80(TCP).
VNP port : Set a port used to transfer video signals with the Samsung protocols.
RTSP port : Used to transfer videos in the RTSP mode; the default is 554.
Viewer port : Used to transfer videos to the Web Viewer; the default is 4520.
The port range of the Viewer is between 4502 and 4534. If the VNP port is with this effective
range, the Viewer port should be specifi ed the same as the VNP port.
Silverlight policy port : Silverlight is used to permit to acquire a network connection;
the default is 943.
You cannot change the Viewer/Silverlight policy server port of a camera.
4.
When done, click [Apply (
48_ setup screen
)].
)> tab.
)].
Advertisement
Table of Contents
