Table of Contents
Advertisement
Installing the certificate
1.
Enter the certificate name.
2.
Select the certificate file to be installed and certificate key, and click [Install (
button.
Deleting the certificate
1.
Click [Delete (
802.1x
When connecting network, you can choose whether using 802.1x protocol, and then install
the certification.
1.
From the Setup menu, select the
<Network (
)> tab.
2.
Click <802.1x>.
3.
Set the <IEEE 802.1x Setting(EAPOL
using EAP-TLS)>.
•
Enable IEEE 802.1x : Specify the use
of the 802.1x protocol.
•
EAPOL Version : Select version 1 or 2.
•
EAPOL ID : Enter the EAPOL ID.
•
EAPOL Password : Enter the EAPOL password.
J
If the connected network device does not support the 802.1x protocol, the protocol will not
operate properly even if you set it.
To install/remove 802.1x related certificates
1.
Press the [Browse (
2.
If no certificate is installed, you will see "Not Available" appearing next to the
selected item.
3.
Press the [Install (
next to the item.
4.
Press the [Delete (
)] button.
)] button for each item and select a certificate to install.
)] button to start installation with a message of "Installed"
)] button to remove the certificate.
)]
English _61
Advertisement
Table of Contents
