LG LRE30451SW Service Manual page 20

REMOVING THE CONVECTION ELEMENT
REMOVING THE CONVECTION ELEMENT
1. Disconnect power and remove oven racks.
2. Pull the range out of its mounting location so that
you can access the rear of the unit.
3. Remove the rear panel from the unit.
(See step 3~4 on page 3-2 for procedure)
4. Disconnect the wire connection.
5. Remove the four Fan cover screws and set the
fan cover aside.
6. To remove Fan blade,
remove Nut by screwing
clockwise. Fan blade can
|be replaced from inside oven.
! CAUTION
Be careful not to bend the fan blade.
COMPONENT ACCESS
Nut Nut Nut Nut Nut
Nut Nut Nut Nut
Nut Nut
Nut Nut Nut Nut Nut Nut
Nut Nut
Nut Nut Nut Nut
Nut Nut Nut Nut
Nut Nut Nut
, F AN BLADE AND F
, F AN BLADE AND F
8. To remove Fan motor assembly, disconnect
wire connection and remove the three bracket
screws
9. Pull the fan motor assembly forward.
Fan cover
Fan cover
Screws
(4ea)
3-8
AN MOT OR
AN MOT OR
Fan
Fan motor
blade Support
Washer
Mounting
Screws
(3ea)
Cavity
Inner Outer
Nut