Hitachi CP-WU5500 User Manual page 12

Installation
2.3 Installing the second projector (Set B) - Setting up Set B
3.
Adjust the image size and position of Set B with the ZOOM ring, VERTICAL
adjuster, HORIZONTAL adjuster and FOCUS ring such that the image can be
superimposed well to the image of Set A.
NOTE • Fine adjustment of the image size and position thereafter with
functions such as KEYSTONE and PERFECT FIT does not increase the
image size. It is therefore important to have the image of Set B completely
overlapping the image of Set A.
• When controlling Set B with the remote control, Set A may also respond to
the remote control. It is recommended to control Set B with the control panel
on Set B.
• If you are using Simple Stack, it is recommended to disable the remote
control receiving on Set B using KEY LOCK or REMOTE ID * and operate
using the control panel or a wired remote control as Set A will respond to the
remote control.
(Operating Guide
• If you are using Simple Stack, go to For Simple Stack users. ( 16 )
* Available only in optional remote control.
4.
Display the menu with the MENU button.
menu function)
5.
Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION
> STACK
STACK menu will appear on screen.
(Operating Guide
6.
Use the ▲/▼ buttons to highlight STACK
MODE, and press the ► button to display the
STACK MODE dialog.
Highlight MAIN with the ▲/▼ buttons, and
press the ◄ button to return to the previous menu.
(continued on next page)
12
→
OPTION menu)
→ OPTION menu)
(continued)
(Operating Guide → Using the