Toshiba e-STUDIO 407CS Series Printing Manual page 133

3.PRINTING FROM Macintosh
9) Resolution
This sets the resolution for printing.
- 600 dpi — Select this to print in 600 x 600 dpi.
- 600 x 1200 dpi — Select this to print in 600 x 1200 dpi.
When [600 x 1200 dpi] is selected, the functions below are not available.
- Booklet printing
- Automatic change of paper source
- Auto Trapping
10) Red Seal Color Mode
Select this check box to enhance color reproducibility of red seal (orient signature) printing.
11) Color Balance
Adjusts the density of each color for printing. You can set from -4 to 4.
This option is selectable only when [Auto], [Color], or [Black and Red / Green / Blue / Cyan / Magenta / Yellow /
White] is selected in the [Color Type] box in the Color Settings 1 menu.
12) Image Attribute
This sets the sharpness, brightness, contrast, saturation and background adjustment for printing.
- Sharpness
Adjusts the sharpness for printing. You can set from -4 (softest) to 4 (sharpest) by moving the scroll bar when the
[Use Sharpness Filter] check box is selected.
- Brightness
Adjusts the brightness for printing. You can set from -4 (darkest) to 4 (lightest) by moving the scroll bar.
- Contrast
Adjusts the contrast for printing. You can set from -4 (lowest) to 4 (highest) by moving the scroll bar.
- Saturation
Adjusts the saturation for printing. You can set from -4 (low clear) to 4 (high clear) by moving the scroll bar.
- Background Adjustment
Adjusts the density level of the background. You can set from -4 (lightest) to 4 (darkest) by moving the scroll bar.
Printing From Application on Mac OS X 10.4.x to Mac OS X 10.8.x
3 PRINTING FROM Macintosh
131