Transfer (Copying) From Vhs; One Touch Transfer (Copying) (Vhs L Dvd) - Panasonic DMR-ES36V Operating Instructions Manual

Transfer (Copying) from VHS

DVD/VHS
POWER
POWER
DRIVE
TV/VIDEO
SELECT
1 2
4 5
8
7
0
CANCEL
RESET RESET
SKIP/INDEX
STOP
∫
TIME SLIP / JET REW
SUB MENU
AUDIO DISPLAY
A
REC REC MODE
[1, PLAY]
[ , STOP]
E
CT

∫ One Touch Transfer (Copying) (VHS l DVD)

[RAM] [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
You can transfer (copy) programs recorded on a tape onto a disc°
with one stroke of the button.
In One Touch Transfer (Copying), programs are automatically
transferred (copied) onto the disc from the location of playback at
the time when the transfer (copying) of the tape starts.
° Available discs for transfer (copying) from tape are DVD-RAM,
non-finalized DVD-R, DVD-R DL, DVD-RW (DVD-Video format),
+R, +R DL, and +RW.
Preparation
≥Select the unit viewing channel (e.g. AV input) on the TV.
DVD
≥Release protection (disc l 55, cartridge l 55). [RAM]
≥Insert a disc and confirm there is sufficient empty space for
recording on it (l 22, 39).
≥Select the recording mode. (l 24)
≥When SAP broadcast program is played back on VHS, select the
audio to be recorded on disc in "Multi-channel TV sound (MTS)" in
the "Setup" menu. (l 59) [-R] [-R]DL] [-RW‹V›] [+R] [+R]DL] [+RW]
VHS
≥Insert the video cassette containing the program to be copied (l 10,
22).
VOLUME
CH
TRACKING/V-LOCK TRACKING/V-LOCK
3
CH
6
ADD/DLT
9
CH
DELETE
INPUT
SELECT
SLOW/SEARCH
REW FF
PAUSE PLAY
CM SKIP
ENTER
RETURN
RETURN
CREATE
VCR/TV
CHAPTER
B
STATUS F Rec
[ , REC]
REC
COPYING COPYING
DV IN
COPYING indicator
[1]
While both DVD and VHS are stopped
Press and hold [" DVD] on
the main unit for about 3
seconds or more (until
"START" on the unit's
display stops flashing).
[-R] [-R]DL] [-RW‹V›] [+R] [+R]DL]
And then press [ ¥ , REC]
or [ , PLAY] on the main
1
unit to copy the disc with
or without finalizing.
≥If you press [¥, REC] on the main unit, the disc will
automatically be finalized after copying completes.
≥If you press [1, PLAY] on the main unit, you can start
copying without finalizing.
≥If you press [∫, STOP] on the main unit, you can cancel to
copy.
≥Check if transfer (copying) starts properly.
≥Copying is automatically completed when the tape reaches its
end or the disc becomes full.
≥If you press [¥, REC] on the main unit to finalize;
After finalizing, the discs become play-only and you can also
play them on other DVD equipment.
However, you can no longer record or edit.
≥In case the copying doesn't complete due to shortage of
remaining time of disc or etc., the finalizing doesn't start.
∫ To stop transfer (copying) in the middle
∫
Press [ , STOP] or press and hold [RETURN] for about 3 seconds
or more.
≥However, you cannot stop finalizing after it has started.
Notes
≥While One Touch Transfer (Copying) is activated, a scheduled
recording cannot be started.
≥When the transfer (copying) is not started or not executed, the
"COPYING" indicator blinks for about 7 seconds. Check if the unit
is properly prepared.
∫ Dividing a title to be copied
In One Touch Transfer (Copying) from VHS to DVD, the title is
divided by index signal detected and then recorded. You can
search desired titles with Direct Navigator's Title View (l 40) after
transfer (copy) to DVD.
≥Titles recorded within 15 minutes (25 minutes in VP mode) of
each other may not be divided properly.
≥The recording time may become longer than the original title
depending on the number of index signals.
If you want to transfer (copy) without dividing the contents
into titles, follow the methods below.
≥Set "Time Limit" to "On" on the GUI transfer (l 48).
e.g.; [RAM]
Copy
Do you want to finalize the disc after copying?
"Finalize" the disc to enable it for playback on
compatible DVD players.
Note: titles cannot be added to finalized discs.
Press REC to start copying. The DVD will
automatically be finalized after copying completes.
Press PLAY to start copying without finalizing.
Press STOP to cancel copying.
47
RQT8977