Table of Contents
Advertisement
Setup menus
(continued)
USER menu
<OPERATION>
No./Item
114
This selects whether to cause the REC INH
lamp to flash or light up when the cassette
REC INH LAMP
has been set to the accidental erasure
prevention status.
0000
LIGHT : The lamp lights up.
0001
FLASH : The lamp flashes.
<Note>
When the REC INH switch is set to ON, the REC
INH lamp always lights regardless of the general
setting status.
115
This selects whether to enable or disable the
operation of the EJECT button on the front
EJECT SW INH
panel.
0000
REC : Operation is disabled while the
0001
116
This selects whether the EJECT lamp is to
remain lighted or be turned off in the
EJECT LAMP
cassette out status.
0000 MODE1 :
The EJECT lamp remains lit.
0001 MODE2 :
The EJECT lamp goes off.
The underlined items indicates the initial setting.
44 (E)
Description
unit is in the recording mode.
OFF : Operation is enabled in all
modes.
Advertisement
Table of Contents
