► 1 . Rear wheel
NOTE: The support legs can be attached instead of
the rear wheels.
4.
Attach the spring washer and the washer to the
short hexagonal bolt, and then tighten them using the
wrench included in the package.
1
► 1 . Short hexagonal bolt 2. Spring washer 3. Washer
NOTICE:
Be sure to use the short hexagonal
bolts to tighten the rear wheels.
NOTICE:
Fix the rear wheels at the same position
on both sides.
1
2
3
9 ENGLISH
5.
Raise the handles, and then insert them into the
base unit.
A
NOTICE:
Do not allow the cords inside area "A"
in the figure. Long objects may be entangled with the
cords and cause accidents.
NOTICE:
Do not apply excessive force to the
cords when raising and inserting the handles.
NOTICE:
Be sure to raise the handles with both
hands.
6.
Open the carrier frame toward the front.
1
► 1 . Carrier frame