Siemens S7-1200 Manual page 39

6 LCCF_EnetScanner block
Valid
TRUE
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE
FALSE
EtherNet/IP Scanner
Entry-ID: 109782314, V1.1.0,
Busy Error Status
Code
(in hex)
TRUE FALSE 16#76x2
FALSE TRUE 16#8006
FALSE TRUE 16#8201
FALSE TRUE 16#8202
FALSE TRUE 16#8203
FALSE TRUE 16#82x4
FALSE TRUE 16#82x5
FALSE TRUE 16#82x6
FALSE TRUE 16#82x7
04/2021
Cause
Overload This warning indicates
situation, updates an overload situation
for adapters may on the scanner side.
have been lost This can be avoided by
increasing the
"Communication load"
setting in the CPU
properties or
increasing the call up
interval of the used
cyclic interrupt.
Cannot setup I/O It appears that the
socket. required UDP
connection resource
cannot be acquired
from the system.
Check and make sure,
there are at least one
unused UDP resource
available. Consult the
technical data for the
used CPU model to
learn how many such
resources the CPU
has.
Invalid interface The specified interface
doesn't support the
specified
acquisition of operation
relevant information.
This interface cannot
be used to be operated
as scanner.
Specify a different
interface.
Number of Reduce the number of
configured adapters in this system
adapters exceed to the maximum
maximum allowed number.
possible adapters
Number of Adjust the array
configured data boundaries to be
areas is lower identical for both
than number of number of configured
configured adapters and available
adapters. data areas.
Invalid O→T size Verify that only one of
configuration for the data size flags are
adapter [x] set.
Invalid T→O size Verify that only one of
configuration for the data size flags are
adapter [x] set.
Invalid Verify that only one of
configuration data the data size flags are
size configuration set.
for adapter [x]
Parameterized Adjust the configured
input buffer is T→O direction data
Remedy
39