Configuring Call Waiting; Blocking Caller Id - Cisco SPA 525G User Manual

Using the Web Interface

Configuring Call Waiting

Configuring Call Waiting
STEP 1
STEP 2
STEP 3
STEP 4

Blocking Caller ID

STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business IP Phone SPA 525G/SPA 525G2 User Guide (SIP)
Call waiting alerts you when you are on a call with a status message and ringing
that another call is incoming. If you turn call waiting off, incoming calls do not ring
your phone if you are on another call, and the caller hears a busy signal or
message.
To turn call waiting on or off:
Log in to the web interface.
In the Voice tab, User menu, under Supplementary Services, locate the CW
Setting field.
Choose yes or no to enable or disable.
At the bottom of the page, click Save All Settings. Your phone reboots.
You can block Caller ID from your phone so that your phone number will not
appear to the person you call.
To block Caller ID:
Log in to the web interface.
In the Voice tab, User menu, under Supplementary Services, locate the Block CID
Setting field.
Choose yes or no to enable or disable.
At the bottom of the page, click Save All Settings. Your phone reboots.
5
98