Advertisement
■ A Closer Look
1
2
Front
1. LED display*
2. RGB lighting
* The LED display function depends
on the different models.
■ Plug In And Power On
• Insert the power adapter cable into the
DC-in jack on the back side of your Smart
Speaker.
• Install the included plug as shown in the
figure and then plug it into a power outlet.*
• The microphone is ON by default.
* The plug type may vary by regions.
1
2
Back
1. AUX IN jack
2. DC-in jack
EN-1
Top
1. Microphone on/off
2. Volume up/down
3. Play/Pause
1
2
3
Advertisement
