Configure The Speaker Volume - Bosch Telex Ascend Manual

24 Operation and Maintenance

Configure the Speaker Volume

Speaker Volume is configured using dip switch settings located on the main board of the headset. The switch bank is located
on the boom mic module and the listen only module.
To access the dip switches, do the following:
NOTE: Dip switches are located on the boom mic module and the listen only module. This feature is not available
on the audio input module.
> Locate the dip switch window on the back of either the boom mic module or the listen only module.
Dip Switch Settings
NOTE: The two (2) right-most switches are used to configure speaker volume.
Bosch Security Systems, Inc.
Speaker Volume Dip Switch Settings
TABLE 1.
Dip Switch
Technical Manual
Description
Intensified
Volume
Normal Volume
F.01U.196.221
Ascend
Rev. 08