Page 1
Set-Up Sheet Set-Up Sheet for the Machine Thank you for purchasing the Canon imageCLASS 2300. To get your machine ready for use, please follow the instructions in this sheet before referring to any other documentation. Unpack the machine and its components.
Registration Card Limited Warranty Note CD-ROM* imageCLASS 2300 Driver Software imageCLASS 2300 Network User Software NOTE An asterisk ( * ) denotes the item only supplied with the Network Model. Printer and network cables are not included. Remove the shipping materials.
Page 3
7 Pull out the left cover and remove the tape on the inside. 6 Open the stack bypass and remove the tape holding the auxiliary tray and the tray extension. IMPORTANT When you transport the machine, you need to screw the metal pin back into the underside of the machine. Install the stamp cartridge.
Install the toner cartridge. 1 Open the stack bypass. 3 Remove the toner cartridge from the bag. Keep the bag in a safe place. 5 Hold the cartridge on a flat stable surface with one hand, and pull out the seal completely with the other hand.
Load paper. 1 Pull out the paper drawer until it stops. NOTE You can skip steps 3, 6 and 7 if you are loading letter size paper in the portrait orientation (LTR Note that some paper sizes have both portrait ( 3 Detach the blue end guide by moving it down to the left then pulling up, and attach it again at...
Connect the telephone cable and the power cord. Connect the phone cable 1 and the power cord 2. Turn on the machine’s power by pressing the power switch 3 to ON (“I” side). The power switch is located on the right side of the machine. Power Cord Using the operation panel Use the following keys on the operation panel to set up the machine for the fax function as explained...
Set the basic fax settings. NOTE For details on setting up the machine for the fax function, see Chapter 1,“Before You Use the Fax Functions,” in the Facsimile Guide. For details on how to input characters, see Chapter 2,“Basic Operations,” in the Reference Guide. Setting the Current Date and Time: 1 Press [Additional Functions] ➝...