Manual Pc Adjustment - Canon LV-S3 Owner's Manual

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. In this
case, the projector cannot reproduce a proper image and the image may be recognized as a flickering picture, a non-
synchronized picture, a non-centered picture or a skewed picture.
The Manual PC Adjustment function allows you to precisely adjust several parameters to match those special signal
formats. You can store those adjusted parameters in the 5 independent memory areas, enabling you to call up whenever
you need.
1 Press MENU button to display the On-Screen Menu. Press Point
7 8 buttons to move the red frame pointer to PC Adjust Menu
icon.
2 Press Point d button to move the red frame pointer to the item
that you want to adjust and then press SET button. Adjustment
dialog box will appear. Press Point
Fine sync
Adjusts an image as necessary to eliminate flicker from the display.
Press Point 7 8 buttons to adjust value.(From 0 to 31.)
Total dots
Adjusts the number of total dots in one horizontal period. Press
Point 7 8 buttons and adjust number to match your PC image.
Horizontal
Adjusts horizontal picture position. Press Point
adjust the position.
Vertical
Adjusts vertical picture position. Press Point
the position.
Current mode
Press SET button to show the information of computer selected.
Clamp
Adjusts clamp level. When the image has a dark bar(s), try this
adjustment.
7 8 buttons to adjust value.
7 8 buttons to
7 8 buttons to adjust
PC Adjust Menu icon
PC ADJUST MENU
Move the red frame pointer to the item
and press SET button.
Selected Mode
Press Point
adjust the value.
Press SET button at this
icon to adjust "Clamp,"
"Display area (H/V)" or set
"Full screen."
Current mode
Press SET button at Current
mode icon to show the
information of computer
connected.
Computer Input
Shows status
(Stored / Free) of the
selected Mode.
7 8 buttons to
25