Canon imageFORMULA DR-1210C User Manual page 96

Keep this Quick Guide near the scanner for ready reference.
Basic Setup Dialog Box
1 1 1 1 1 User Preference
Name and save your settings.
The name can consist of up to 32 characters.
2 2 2 2 2 Mode
Selects the scanning mode.
Selecting [24-bit Color] enables the [Color
Smoothing] settings in the Advanced Settings
dialog box.
3 3 3 3 3 Page Size
Selects the size of the pages to be scanned.
Selecting [Auto-detection] enables automatic page
size detection when scanning.
4 4 4 4 4 Dots per inch
Selects the scanning resolution.
5 5 5 5 5 Brightness
Adjusts the brightness of scanned images.
6 6 6 6 6 Contrast
Adjusts the contrast of scanned images
[Contrast] is set automatically when the Advanced
Text Enhancement mode is selected.
7 7 7 7 7 Paper Source
Specifies the location of documents placed on the
scanner.
When [Auto] is selected, if a document is detected
in the feeder, that document is automatically
scanned. If no document is detected in the feeder,
documents are scanned from the flatbed.
When [Flatbed] is selected, documents are
scanned from the flatbed.
When [Feeder] is selected, documents are scanned
from the feeder.
8 8 8 8 8 Feeding Option
Selects the document feeding method.
[Standard Feeding] scans all loaded documents
when scanning is started from the application
program.
[Panel-Feeding] scans all loaded documents when
scanning is started by pressing the scanner's scan
button.
[Automatic Feeding] starts scanning when the
feeder detects a loaded document.
9 9 9 9 9 Prescan
When scanning starts, one document is scanned and
its image is displayed in the Prescan window.
0 0 0 0 0 Deskew
When a document page feeds at a slant, the scanned
image is straightened.
A A A A A Scanning Option
Specifies operation during scanning.
[Standard]:
After one page has been scanned and ejected, the
next page is scanned.
[Scan Ahead]:
Scans document pages continuously.
[Scan Single Page]:
Scans only one page.
TWAIN Driver Quick Guide
Scan Area Dialog Box
B B B B B Page Size
Selects the size of the pages to be scanned.
C C C C C Area
Specifies the area to be scanned.
Advanced Settings Dialog Box
D D D D D Edge emphasis
Enhances the contours in scanned images.
E E E E E Color drop-out
Enabled for all scanning modes except [24-bit Color],
this function selects skipping (drop-out) or
enhancement of red, green or blue when scanning
documents.
F F F F F Color Smoothing
When scanning photos from magazines or catalogs
with [24-bit Color] mode, you can use this function to
remove moiré patterns from scanned color images.
Selecting this check box activates pixel averaging in
scanned images.
G G G G G Document Orientation
Specify clockwise rotation of scanned images
according to the orientation of documents to be
scanned.
H H H H H Border Removal
Removes the black border that may be created around
scanned images.
I I I I I Punch Hole Removal
Removes the black holes created in scanned images
when scanned documents have holes punched for
binding.
J J J J J Reverse Image
When the [Black and White], [Error Diffusion] or
[Advanced Text Enhancement] mode is selected, black
and white are reversed in the scanned image.
K K K K K Text Orientation Recognition
Detects the text orientation in scanned images and
rotates the images in 90° increments to normalize text
orientation.
L L L L L Rapid recovery system
Select this function to prevent error reporting to the
application program when feeding is interrupted due to
a paper jam or similar error while scanning. After fixing
the cause of the interruption, scanning can be quickly
resumed with standard operations.
This Quick Guide describes the TWAIN driver settings.
Click the Help button for details.
Click [Custom] to register a non-standard document
size as a custom page size.
These settings are disabled when [Auto-detection]
is selected for the page size.