Adjustment Note - Siemens SCD 1897-M Replacements Of Parts

6

Adjustment Note

Tab. 1 Push buttons
All required adjustments are made using the push-buttons on
the side of the unit.
The push-buttons are locked when shipped (new system).
For the function of the push-buttons, see the Instruction Man-
ual included in the shipment.
Unlocking or locking them is done as follows:
- Press the "SET" button 1x.
- Press the " Up" button (arrow pointing up) 3x.
NOTE
NOTE
Display
Adjustments may be performed only after a warm-up time of 15
minutes!
As a rule, the push-buttons are not locked in replacement units
(from the E-warehouse).
They must be locked following installation.
TD00-000.841.02.04.02
05.05
General Information
Fig. 1:
Page 6 of 22
CSPS21
0
Siemens AG
Medical Solutions