When [Multi Layout] Is Selected - Canon SELPHY ES1 User Manual

When [Multi Layout] is selected

First perform steps 1 to 3 on page 32, then proceed to step 4 below.
4
Press the
the layout and press the SET button.
You can change the background color by pressing the EDIT button. Press the
button to select the color, and press the MENU button.
8 images per sheet layout can be specified only when printing on card size paper.
5
Press the
to assign to the initial frame and press the
or button.
You can switch the image display to index playback,
enlarged display and other displays (see Single Photo Print
step 2 on page 28). Note that image information is not
displayed.
Press the EDIT button to trim images assigned to the
layout frame (see Single Photo Print step 3 on page 29).
Note that trimming is performed matching the aspect ratio of the assigned layout frame
(e.g., width-to-height ratio approximately 4:3 for 2-up and 4-up).
To cancel an assigned image, press the
6
Press the DISP. (Display) button to select the
next frame.
7
Repeat steps 5 and 6 to assign images to desired frames.
If you want to create a blank space, press the DISP. (Display) button to move the frame.
Write comments or the title in the blank spaces with an oil-based pen.
, , or button to select
or button to select the image
2 images per sheet
4 images per sheet
8 images per sheet
3 images per sheet
or button again.
Outline of the
printable area
Layout frame already assigned an image
Currently selected layout frame
or
Outline of the
printable area
35