Canon PIXMA iP4700 Series Getting Started page 16

5
□ Print Head Alignment
Load a sheet of supplied speciality paper (Matte Photo Paper MP-101) in
the Rear Tray (A) and click Execute. Do not open the Top Cover (B) while
printing. For details, refer to "6 Loading Paper" on page 16.
If any other papers have been loaded already, remove it and load the MP-101
paper.
• Be sure to use MP-101 for Automatic Print Head Alignment.
• MP-101 cannot be fed from the Cassette. Load it in the Rear Tray.
• MP-101 has front and back sides. Load it so that the cut corner (C) is at the top right.
• Make sure that the Output Tray Extension (D) is extended.

Important Information for the Installation
C
A
B
D
E
When the pattern (E) shown is printed, Print Head Alignment is now complete.
In Windows, click Next on the Print Head Alignment screen.
• Wait until the pattern printing ends (about 5 minutes).
• If the Alarm lamp (orange) (F) flashes, press the RESUME/CANCEL button (G)
on the printer to clear the error, then click Next. After the installation is complete,
perform Print Head Alignment by referring to "When Printing Becomes Faint or
Colors Are Incorrect" in the on-screen manual: Basic Guide.
• The pattern is printed in blue and black.
F G