Cleaning The Appliance; Cleaning Accessories; Cleaning The Blender - Silvercrest SKMP 1300 D4 Operating Instructions Manual

Cleaning the appliance

■ Wipe the appliance with a damp cloth. For
stubborn soiling use a mild detergent on the
cloth. Wipe off any detergent residue using a
cloth moistened with fresh water. Then dry the
appliance carefully.

Cleaning accessories

■ Clean the mixing bowl
lid with the lid catch
, the blade , the drive unit lid
attachments
little detergent. Any residues can be removed
with a washing-up brush. Rinse all parts with
fresh hot water and make sure that all parts are
dry before re-using them.
NOTE
► The attachments
, mixing bowl
blender lid
the blade
be cleaned in the dishwasher. We
recommend hand-washing all parts,
however.
► If you clean components in the dishwasher,
please ensure that no plastic parts can get
jammed or caught anywhere. Otherwise, they
may become deformed!
► If possible, place all plastic parts in the top
basket of the dishwasher.
SKMP 1300 D4
, the lid , the blender
and measuring cup
and the
in warm water with a
, the lid
, blender ,
, measuring cup and
with the sealing ring can

Cleaning the blender

WARNING! RISK OF INJURY!
► Do not handle the blade
hands.
■ Remove the blade
clean it thoroughly:
–
if necessary, pull the blender lid
the blender
"Working with the blender".
–
Turn the blender
–
Use the lid catch
To do this, place the lid catch
locking tabs on the bottom of the blade
and turn them anticlockwise until the blade
can be removed (figs. 4).
/
Fig. 4
■ Clean the blender
ring in warm water with a mild detergent.
Afterwards, rinse all parts with fresh water so
that no detergent residues remain.
with your bare
from the blender
off
as described in the section
upside down.
to remove the blade
in the
, blade and sealing
GB │ IE │ 27
to
.
■