Follow the steps in Follow the steps in this Quick Start Guide this Quick Start Guide to unpack and set up to unpack and set up your new BJC-8200 your new BJC-8200 Color Bubble Jet Color Bubble Jet Photo Printer. Photo Printer.
You will need a parallel or USB cable. Remove and discard all shipping tape and materials. Important! Always lift the printer by gripping both sides. Extend the Paper Support and Paper Output Tray Important! Before moving on to Step 3, make sure your computer is turned off.
Install the Cartridge Lift the front cover. The cartridge holder moves to the center of the printer. Remove the shipping material from the cartridge holder. Remove the cartridge from the packaging. Remove and discard the orange protective cap. Important! Do NOT touch the printhead or metallic contacts.
Page 4
Insert the remaining BJ tanks. The BJ tanks must be inserted in the order shown on the color guide label. Close the front cover. The printer automatically performs the print head cleaning. This procedure takes approximately 40 seconds.
Make sure that the printer is con- nected, then turn on the computer. If you see the New Hardware Wizard, insert the Canon Creative CD-ROM into your CD-ROM drive and follow the on-screen instructions. If you do not see the New Hardware Wizard, wait until Windows com- pletes booting up.
BCI, Bubble Jet, Canon Think Tank System, Drop Modulatio Technology, PhotoRealism, “See What We Mean” and WebRecord are trademarks and Select Exchange is a service mark of Canon Inc. All other product and brand names are registered trademarks or trademarks of their respective owners.