Self-Timer Operation - Canon EOS 1D Mark II N Instruction Manual

Self-timer Operation

Do not stand in front of the camera when you press the shutter button to
start the self-timer. Doing so will throw off the focus.
Use a tripod when you use the self-timer.
Before starting the self-timer, look through the viewfinder or cover it with
the eyepiece shutter (p.111).
To cancel the self-timer after it starts, set the <
When using the self-timer to shoot only yourself, use focus lock (p.81) for
an object at about the same distance as where you will be.
The 2-second self-timer is effective for close-ups or photo duplicating
work to prevent camera shake (camera movement while the shutter
button is pressed).
92
1
Select the self-timer mode.
Hold down the <
Q
< > buttons and turn the <
dial to select the desired self-timer
mode. Then let go of the buttons.
2
Focus the subject.
Look in the viewfinder and press the
shutter button halfway to check that
the focus confirmation light is on and
the exposure setting is displayed.
3
Take the picture.
Press the shutter button completely.
The self-timer lamp will start blinking
to indicate that it is counting down.
The lamp's blinking will become
faster two seconds before the picture
is taken.
W
> and
k
: 10-sec. self-
timer
l
: 2-sec. self-
timer
4 2
> switch to <
6
>
>.